Development of residual stresses in fatigue-stressed joints subjected to four-point bending

被引：0
|
作者：
Dattoma, V. [1 ]
de Giorgi, M. [1 ]
Nobile, R. [1 ]
机构：
[1] University of Salento, Italy
来源：
Welding International | 2012年 / 26卷 / 03期
关键词：
D O I：
10.1080/09507116.2011.592692
中图分类号：
学科分类号：
摘要：
15
引用
收藏
页码：196 / 204
相关论文
共 50 条
  • [1] The effects of nanostructure additive on fracture strength in adhesively bonded joints subjected to fully reversed four-point bending fatigue load
    Demir, Kubra
    Gavgali, Esma
    Yetim, Ali Fatih
    Akpinar, Salih
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2021, 110
  • [2] STUDY OF MECHANICAL BEHAVIOUR IN THREE-POINT BENDING OF FATIGUE-STRESSED COMPOSITE LAMINATES
    Khelifa, Noureddine
    Bey, Kamel
    Mzad, Hocine
    COMPOSITES THEORY AND PRACTICE, 2021, 21 (03): : 107 - 113
  • [3] Evaluation of residual fatigue strength for impacted CFRP laminates (case of the four-point bending test)
    Matsumoto, Hiroyuki
    Okazaki, Mitsuhiro
    Adachi, Tadaharu
    Ujihashi, Sadayuki
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1991, 57 (535): : 576 - 582
  • [4] Investigation into the size effect on four-point bending fatigue tests
    Li, N.
    Molenaar, A. A. A.
    van de Ven, M. F. C.
    Pronk, A. C.
    Wu, S.
    FOUR-POINT BENDING, 2012, : 35 - 47
  • [5] Static and fatigue behavior of CFRP strengthened spiral welded steel tubes subjected to four-point bending
    Salim, Andre Cahyadi
    Zhang, Yining
    Hu, Lili
    Shao, Chengjian
    OCEAN ENGINEERING, 2024, 314
  • [6] Fretting fatigue of interference fitted joints: development of a novel specimen for four-point rotating-bending tests and experimental results
    Croccolo, D.
    De Agostinis, M.
    Fini, S.
    Olmi, G.
    Paiardini, L.
    Robusto, F.
    Scapecchi, C.
    ENGINEERING FAILURE ANALYSIS, 2023, 144
  • [7] Numerical and analytical investigation of steel beam subjected to four-point bending
    Farida, F. M.
    Surahman, A.
    Sofwan, A.
    QUALITY IN RESEARCH: INTERNATIONAL SYMPOSIUM ON MATERIALS, METALLURGY, AND CHEMICAL ENGINEERING, 2018, 316
  • [8] Finite element analysis of adhesive joints in four-point bending load
    Ozel, A
    Kadioglu, F
    Sen, S
    Sadeler, R
    JOURNAL OF ADHESION, 2003, 79 (07): : 683 - 697
  • [9] On the difference of fatigue strengths from rotating bending, four-point bending, and cantilever bending tests
    Hassan, T
    Liu, Z
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2001, 78 (01) : 19 - 30
  • [10] Review and prospect of four-point bending fatigue test of asphalt mixture
    Yongjun Meng
    Dichao Liu
    Hongliu Rong
    Xiaolong Yang
    Journal of Road Engineering, 2024, 4 (04) : 446 - 467
12345