EXPANSION INTO EXISTING WOODEN HOUSES INCLUDING TRADITIONAL CONSTRUCTION FOR JOINT REINFORCEMENT METHOD USING ARAMID FIBER SHEET

被引：0

作者：

Takiyama N. ^{[1
]}

Ogino T. ^{[2
]}

Chen X. ^{[3
]}

机构：

[1] Dept. of Architecture and Building Eng., Tokyo Metropolitan Univ.

[2] NIHON SEKKEI, INC.

来源：

Journal of Structural and Construction Engineering | 2023年 / 88卷 / 810期

关键词：

Aramid fiber sheet; Bending test; Existing wooden joint; Peeling Test; Seismic reinforcement; Tensile test;

D O I：

10.3130/aijs.88.1250

中图分类号：

学科分类号：

摘要：

This paper reports the results of our research on bending and pull-out behavior of the wooden joint reinforced by aramid fiber sheet. First, conducting some element tests of sheet pasting forms, we understood the fundamental mechanical properties and some problems: the breakage of fiber-reinforced plastic by concentrated compressive force, the detachment prompted by non-adhered sheet to woods, etc. Then, we proposed some solution to the former problems. Next, we understood material characteristics of sheet on some material tests. Lastly, building analytical model of joint, we could simulate element tests by increment analysis with high precision. © 2023 Architectural Institute of Japan. All rights reserved.

引用

页码：1250 / 1261

页数：11

共 5 条

[1] Study on reinforcement of opening in existing wooden houses using sliding doors
Miyamoto M.
Yamaki Y.
Sato H.
1600, Architectural Institute of Japan (22): : 489 - 494and835
[2] Impact resistance to ballistic ejecta of wooden buildings and a simple reinforcement method using aramid fabric
Yamada, Hiroyuki
Tateyama, Kohei
Sasaki, Hisashi
Naruke, Shino
Kishimoto, Hiroshi
Yoshimoto, Mitsuhiro
JOURNAL OF VOLCANOLOGY AND GEOTHERMAL RESEARCH, 2018, 359 : 37 - 46
[3] Seismic retrofit method for existing wooden houses with lattice bearing wall using thick plywood
Department of Architectural Engineering, Faculty of Engineering, Oita University, 700 Dannoharu, Oita city, Oita, Japan
World Conf. Timber Eng., WCTE, (464-469):
[4] Study on parts processing of the traditional wooden construction method using articulated robot
Takabayashi H.
Motoike R.
Aida K.
Kado K.
Hirasawa G.
AIJ Journal of Technology and Design, 2016, 22 (50) : 331 - 334
[5] Bolted joint method for composite materials using a novel fiber/metal patch as hole reinforcement-Improving both static and fatigue properties
Jakobsen, Johnny
Endelt, Benny
Shakibapour, Fahimeh
COMPOSITES PART B-ENGINEERING, 2024, 269

← 1 →