Bioactivity and in vitro degradation behavior of MgZnCa thin-film metallic glass

被引：0
|
作者：
Xu L. [1 ]
Zhou H. [2 ]
Bian X. [1 ]
Sun K. [1 ]
Fu R. [3 ]
Liu X. [4 ]
Wang G. [1 ]
机构：
[1] Institute of Materials, Shanghai University, Shanghai
[2] Department of Orthopedics, Bengang General Hospital, Liaoning Health Industry Group, Benxi
[3] Department of Neurology, Tongren Hospital Affiliated to Shanghai Jiao Tong University School of Medicine, Shanghai
[4] Department of Sports Medicine, Huashan Hospital, Fudan University, Shanghai
来源：
Zhongguo Kexue Jishu Kexue/Scientia Sinica Technologica | 2022年 / 52卷 / 11期
关键词：
biocompatibility; corrosion; in vitro cell experiment; magnesium-zinc-calcium thin film metallic glass;
D O I：
10.1360/SST-2021-0220
中图分类号：
学科分类号：
摘要：
Magnetron sputtering was used to prepare MgZnCa thin-film metallic glass (MG), and a single roller melt-spinning method was used to prepare amorphous MgZnCa ribbon. Potential polarization curves of MgZnCa amorphous ribbon and bulk high-purity magnesium (HP Mg) in simulated body fluids were compared using electrochemical tests. The corrosion resistance of MgZnCa MG is found to be significantly better than that of HP Mg, which is mainly attributed to its higher corrosion potential and lower corrosion current density. Immersion experiments, hydrogen evolution experiments, X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to analyze the structure and composition of MgZnCa thin-film MG (TFMG) before and after corrosion, showing that the release rate of hydrogen was the fastest in the first hour, with active magnesium and calcium on the film’s surface preferentially dissolved. Furthermore, the appearance of a zinc-rich phase in the corrosion film and the increase in local pH promotes the precipitation of phosphate, which can improve the corrosion resistance of MgZnCa MG. In vitro experiments show that the 25% concentration extract obtained after soaking the MgZnCa MG has higher cell viability and lower apoptosis rate than the control medium, indicating that the MgZnCa MG is biocompatible. Therefore, with excellent corrosion resistance and biocompatibility, MgZnCa MG can be used as bioactive coatings on the surface of biologically inert materials. © 2022 Chinese Academy of Sciences. All rights reserved.
引用
收藏
页码：1692 / 1704
页数：12
相关论文
共 66 条
  • [1] Jayesh R S, Dhinakarsamy V., Osseointegration, J Pharm Bioallied Sci, 7, pp. S226-S229, (2015)
  • [2] Liu Y, Rath B, Tingart M, Et al., Role of implants surface modification in osseointegration: A systematic review, J Biomed Mater Res, 108, pp. 470-484, (2020)
  • [3] Nagay B E, Cordeiro J M, Barao V A R., Alloy Materials and Their Allied Applications: Alloy Materials for Biomedical Applications, pp. 159-189, (2020)
  • [4] Navarro M, Michiardi A, Castano O, Et al., Biomaterials in orthopaedics, J R Soc Interface, 5, pp. 1137-1158, (2008)
  • [5] Hench L L, Polak J M., Third-generation biomedical materials, Science, 295, pp. 1014-1017, (2002)
  • [6] Kantesh B, Roger N, Agarwal A., Biosurfaces: A Materials Science and Engineering Perspective, pp. 201-238, (2014)
  • [7] Cha P R, Han H S, Yang G F, Et al., Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases, Sci Rep, 3, (2013)
  • [8] Pei Y F, Li X K, Wang C R, Et al., Surface modification of porous titanium alloy by magnesium coating and its effect on bone formation (in Chinese), Chin J Orthop Trauma, 17, pp. 438-443, (2015)
  • [9] Zreiqat H, Valenzuela S M, Nissan B B, Et al., The effect of surface chemistry modification of titanium alloy on signalling pathways in human osteoblasts, Biomaterials, 26, pp. 7579-7586, (2005)
  • [10] Abisegapriyan K S, Rajeshwari A, Kundu S, Et al., Magnesium glassy alloy laminated nanofibrous polymer as biodegradable scaffolds, J NonCrystalline Solids, 502, pp. 210-217, (2018)
1234567