Effect of Ta on High Temperature Tensile Properties of Advanced Ni-based Powder Metallurgy Superalloys

被引：0

作者：

Wang Z. ^{[1
]}

Wang H. ^{[1
]}

Huang H. ^{[1
]}

Hu B. ^{[1
]}

机构：

[1] School of Material Science and Engineering, University of Science and Technology Beijing, Beijing

来源：

Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2019年 / 33卷 / 05期

基金：

中国国家自然科学基金;

关键词：

Deformation mechanism; Metallic material; Microstructure; Ni-based P/M superalloy; Tensile properties;

D O I：

10.11901/1005.3093.2018.494

中图分类号：

学科分类号：

摘要：

Microstructure and high temperature tensile properties of five powder metallurgy FGH98 alloys with different Ta content were systematically investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscope (TEM) and high temperature tensile testing machine. The results show that: Ta can obviously eliminate the prior particle boundaries (PPB) and change the morphology of secondary γ'-phase. Ta can promote the generation of tertiary γ'-phase. Ta improved the high temperature tensile strength and yield strength of the alloys. When the Ta content was 2.4% (the same below), the alloy has the preferable plasticity. Alloys without Ta and with 1.2%Ta showed a crystalline-like fracture surface while the alloy with 2.4%Ta showed ductile fracture surface. Alloys with 3.6%Ta and 4.8%Ta exhibited transgranular and intergranular cleavage fractures. The alloy without Ta deformed mainly by generating a large number of twins and dislocations bypassing the γ'-phase. With the increasing Ta content, the dislocations shear the γ'-phase, therewith produce a large number of stacking faults. © All right reserved.

引用

页码：331 / 337

页数：6

共 23 条

[1] Zhang Y.W., Liu J.T., Development in powder metallurgy superalloy, Mater China, 32, 1, (2013)
[2] Jia C.C., Tian G.F., Powder metallurgy superalloy, Metal World, 21, 2, (2011)
[3] Jia J., Tao Y., Zhang Y.W., Et al., Recent development of third generation P/M superalloy rené104, Powder Metallurgy Industry, 17, 3, (2007)
[4] Janowski G.M., Heckel R.W., Pletka B.J., The effects of tantalum on the microstructure of two polycrystalline nickel-base superalloys: B-1900+Hf and MAR-M247, Metall. Trans. A, 17, 11, (1986)
[5] Nathal M.V., Ebert L.J., The influence of cobalt, tantalum, and tungsten on the microstructure of single crystal nickel-base superalloys, Metall. Trans. A, 16, 10, (1985)
[6] Zheng L., Zhang G., Lee T.L., Et al., The effects of Ta on the stress rupture properties and microstructural stability of a novel Ni-base superalloy for land-based high temperature applications, Mater. Des, 8, 61, (2014)
[7] Zhang J., Effect of Ti and Ta on hot cracking susceptibility of directionally solidified Ni-based superalloy IN792, Scripta Mater, 48, 6, (2003)
[8] Jones J., Mackay D.J.C., Tensile deformation behavior of a nickel based superalloy at different temperatures, Proceedings of the 8th International Symposium on Superalloy, (1996)
[9] Wu K., Liu G.Q., Hu B.F., Et al., Research progress of new type highperformans P/M turbine disk supealloys, Mater China, 29, 3, (2010)
[10] Yang J., Dong J.X., Zhang M.C., Er A.L., High temperature fatigue crack growth behavior of a novel powder metallurgy superalloy FGH98, Acta.Mater.Sin, 49, 1, (2013)

← 1 2 3 →