Starting control based on wet dual clutch transmission

被引:0
|
作者
Cheng X. [1 ]
Feng W. [1 ]
Lu Z. [1 ]
Wang Y. [1 ]
机构
[1] College of Automotive Engineering, Jilin University
关键词
Dual clutch transmission; Fuzzy PID control; Starting control; Wet clutch;
D O I
10.3969/j.issn.1000-1298.2010.01.004
中图分类号
学科分类号
摘要
Aimed at the problem of starting control of dual clutch transmission equipped with wet clutch, the starting strategy was developed on the basis of clutch control evaluation and dynamics analysis about transmission. The clutch pressure control method was proposed based on fuzzy PID control, and the detailed fuzzy control process was developed. The control flow of DCT starting was determined so that the clutch actual pressure got better control. Starting experiments of three different throttle and continuous start-stop experiments in a short time were executed. The experimental results verified the rationality of the control strategies. It could meet the requirements of smooth and rapid vehicle starting, and establish the foundation for the further development of DCT.
引用
收藏
页码:18 / 22+28
相关论文
共 6 条
  • [1] Wu G., Yang W., Qin D., Key technique of dual clutch transmission control system, Chinese Journal of Mechanical Engineering, 43, 2, pp. 13-19, (2007)
  • [2] Niu M., Cheng X., Ge A., Et al., Pressure control of AMT clutch during engaging, Journal of Jilin University: Engineering and Technology Edition, 34, 2, pp. 198-201, (2004)
  • [3] Holgerson M., Optimizing the smoothness and temperatures of a wet clutch engagement through control of the normal force and drive torque, Journal of Tribology, 122, 1, pp. 119-123, (2000)
  • [4] Cameron T.M., McCombs T., Devlin M., Et al., ATF friction properties and shift quality, (2004)
  • [5] Zhu W., Chen Y., Application and simulation of automotive ABS using fuzzy PID control, Journal of Jiangsu University: Natural Science Edition, 25, 4, pp. 310-314, (2004)
  • [6] Yang Q., Zhou K., Zhang W., Et al., Fuzzy-PID control on semi-active air suspension, Transactions of the Chinese Society for Agricultural Machinery, 39, 9, pp. 24-29, (2008)