Thermal reclamation of used resin bonded sands

被引：0

作者：

School of Materials Science and Engineering, Shandong Institute of Architecture and Engineering, Jinan 250101, China ^{[1
]}

不详 ^{[2
]}

机构：

来源：

Zhuzao | 2006年 / 6卷 / 646-648期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

It was introduced that the principle of the thermal reclamation for used resin bonded sands and fluidized bed reclamation equipment. It is founded by studying that the index of sands shape, gas evolution, thermal expansibility are lower, the degree of collecting, tensile strength are higher and the grain shape is more round of reclamation molding sand then those of new sands. Foundry process properties of the thermal reclamation sands are better than that of the same kind new sands.

引用

共 50 条

[1] THERMAL RECLAMATION OF RESIN-BONDED SANDS.
Lavington, M.H.
Foundry Trade Journal, 1985, 158 (3303): : 267 - 269
[2] THERMAL RECLAMATION OF THE USED MOULDING SANDS
Lucarz, M.
METALURGIJA, 2015, 54 (01): : 109 - 112
[3] PNEUMATIC RECLAMATION OF USED SILICATE-BONDED SANDS.
Fomin, V.N.
Zinchenko, Yu.A.
Kutovoi, N.L.
Gordeev, A.N.
Soviet Castings Technology (English Translation of Liteinoe Proizvodstvo), 1987, (05): : 30 - 33
[4] Possibilities for Reclamation of Used Water Glass Bonded Foundry Sands.
Jennes, Norbert
Giessereitechnik, 1975, 21 (12): : 408 - 411
[5] Re-Use of Resin Bonded Used Sands.
Bindernagel, Inge
Giesserei, 1972, 59 (20): : 612 - 615
[6] Solution to enable the thermal reclamation of alkaline phenolic ester bonded sands
Wheeler, Rodger
Foundryman, 1997, 90 (pt 7): : 255 - 257
[7] SETTING TEMPERATURE FOR THERMAL RECLAMATION OF USED MOULDING SANDS ON THE BASIS OF THERMAL ANALYSIS
Lucarz, M.
METALURGIJA, 2015, 54 (02): : 319 - 322
[8] Setting temperature for thermal reclamation of used moulding sands on the basis of thermal analysis
AGH University of Science and Technology, Kraków, Poland
Metalurgija, 2 (319-322):
[9] ELECTROHYDRAULIC SAND RECLAMATION FROM USED SILICATE-BONDED MOLDING SANDS.
Kukui, D.M.
Odinochko, V.F.
Soviet Castings Technology (English Translation of Liteinoe Proizvodstvo), 1987, (05): : 43 - 45
[10] Reclamation of used sands in foundry production
Danko, J
Danko, R
Holtzer, M
METALURGIJA, 2003, 42 (03): : 173 - 177

← 1 2 3 4 5 →