Design and energy regenerative study on vehicle semi-active suspension with electro-hydrostatic actuator

被引:0
|
作者
Kou F. [1 ]
机构
[1] College of Mechanical Engineering, Xi'an University of Science and Technology, Xi'an
关键词
Bench test; Electro-hydrostatic actuator; Energy management; Optimal control; Regenerative energy; Semi-active suspension;
D O I
10.6041/j.issn.1000-1298.2016.05.048
中图分类号
学科分类号
摘要
In order to effectively realize the damping control and regenerative energy recovery of vehicle suspension, electro-hydrostatic actuator (EHA) technology in the aerospace field was introduced into vehicle suspension system and a kind of vehicle semi-active suspension with EHA was put forward. For the following simulation analysis of suspension performance, 2-DOF mechanical model of vehicle semi-active suspension and EHA mathematical model were established. The EHA prototypes were designed and developed for test parameters' identification and regenerative energy recovery. Then, the characteristic tests of the generator and energy regenerative tests of EHA were completed. The optimal control and energy management control strategies of EHA semi-active suspension were designed. The dynamic performances and energy regenerative characteristics of semi-active suspension with EHA were simulated by AMESim and Matlab/Simulink software. The test bench systems for semi-active suspension were developed. Then, the tests of semi-active suspension with EHA were done. The simulation results show that for semi-active suspension with EHA, sprung mass acceleration drops by 23.97%, suspension dynamic deflection drops by 18.36%, and tire dynamic load drops by 11.50%. And the energy regenerative efficiency is 36.4% under vehicle speed of 30 km/h and C-level road excitation is 67.4% under amplitude of 0.05 m and frequency of 4 Hz sinusoidal excitation. The test results show that compared with passive suspension, sprung mass acceleration of semi-active suspension with EHA drops by about 20%. The damping effect of developed semi-active suspension with EHA is obvious. © 2016, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码:352 / 359
页数:7
相关论文
共 20 条
  • [1] Majdoub K., Ghani D., Giri F., Et al., Adaptive semi-active suspension of quarter-vehicle with magnetorheological damper, Journal of Dynamic Systems, Measurement, 137, 2, (2015)
  • [2] Tseng H.E., Hrovat D., State of the art survey: active and semi-active suspension control, Vehicle System Dynamics, 53, 7, pp. 1034-1062, (2015)
  • [3] Wang G., Chen C., Yu S., Finite frequency multi-objective control of vehicle active suspension with road preview information, Transactions of the Chinese Society for Agricultural Machinery, 46, 12, pp. 294-300, (2015)
  • [4] Yang L., Chen W., Gao Z., Et al., Nonlinear control of quarter vehicle model with semi-active suspension based on solenoid valve damper, Transactions of the Chinese Society for Agricultural Machinery, 45, 4, pp. 1-7, (2014)
  • [5] Zhao C., Chen S., Wang J., Influences of stiffness and damping parameters on control of active suspension based on LQG, Transactions of the Chinese Society for Agricultural Machinery, 46, 12, pp. 301-308, (2015)
  • [6] Wang R., Meng X., Shi D., Et al., Fuzzy control of vehicle ISD semi-active suspension, Transactions of the Chinese Society for Agricultural Machinery, 44, 12, pp. 1-4, (2013)
  • [7] Li C., Zhu R., Liang M., Et al., Integration of shock absorption and energy harvesting using a hydraulic rectifier, Journal of Sound and Vibration, 333, 17, pp. 3904-3916, (2014)
  • [8] Zhang Y., Zhang X., Zhan M., Et al., Study on a novel hydraulic pumping regenerative suspension for vehicles, Journal of the Franklin Institute, 352, 2, pp. 485-499, (2015)
  • [9] Liu S., Wang Q., Wang W., A simulation analysis on the nonlinear damping characteristics of electromagnetic regenerative suspension, Automotive Engineering, 36, 12, pp. 1528-1533, (2014)
  • [10] Fang Z., Guo X., Zuo L., Et al., Theory and experiment of damping characteristics of hydraulic electromagnetic energy-regenerative shock absorber, Journal of Jilin University: Engineering and Technology Edition, 44, 4, pp. 939-945, (2014)