Study on Properties of Cr8 Stamping Die Steel for Automobile High Strength Plate

被引：0
|
作者：
Wei W. [1 ,3 ]
Zhou J. [1 ]
Li H. [1 ]
Li K. [1 ]
Zhao L. [2 ]
Yuan S. [3 ]
机构：
[1] SAIC GM Wuling Automobile Co., Ltd., Liuzhou
[2] Baoshan Iron & Steel Co., Ltd., Shanghai
[3] Beijing Research Institute of Mechanical and Electrical Technology, Beijing
来源：
Qiche Gongcheng/Automotive Engineering | 2020年 / 42卷 / 06期
关键词：
Carbide; Die steel; Dimension stability; Microstructure;
D O I：
10.19562/j.chinasae.qcgc.2020.06.018
中图分类号：
学科分类号：
摘要：
A new type of Cr8 cold working die steel HNC53has been developed in this project. The chemical composition analysis, metallographic analysis and mechanical performance test are carried out. Then samples are designed for heat treating as well as thermal diffusion treating (TD) The results show that the control accuracy of harmful impurities like P and S is of high standard, which is below 0.03% and 0.005% respectively. The carbides are dispersed in pearlite, with maximum size of 25 μm×12 μm. The maximum change rate of the three-dimensional dimensions is 1.58‰ after heat treating and surface treatment. The hickness of TD coating is 10 μm and the matrix structure is uniform. Compared with materials of the same kind, the performance indexes of HNC53 have reached the standard of imported materials. © 2020, Society of Automotive Engineers of China. All right reserved.
引用
收藏
页码：826 / 831
页数：5
相关论文
共 12 条
  • [1] (1998)
  • [2] (2010)
  • [3] 6
  • [4] SINGH K, KHATIRKAR R K, SAPATC S G., Microstructure evolution and abrasive wear behavior of D2 steel, Wear, 328-329, (2015)
  • [5] PARK J S, LEE M G, CHO Y J, Et al., Effect of heat treatment on the characteristics of tool steel deposited by the directed energy deposition process, Met.Mater. Int, 22, (2016)
  • [6] OIKAWA T, ZHANG J J, ENOMOTO M, Et al., Influence of carbide particles on the grain growth of ferrite in an Fe-0.1-0.09V alloy, ISIJ Int, 153, (2013)
  • [7] 1
  • [8] 1
  • [9] GAARD A., Galling resistance for un-coated and coated tool steels sliding against high strength carbon steel sheet, Leoben, Proceedings of the 9th International Tooling Conference, pp. 477-484, (2012)
  • [10] KUBOTA K, OHBA T, MORITO S., Frictional properties of new developed cold work tool steel for high tensile strength steel forming die, Wear, 271, pp. 2884-2889, (2011)
12