ENERGY FACTOR BASED SEISMIC DESIGN AND EVALUATION METHOD FOR TENSION-ONLY BRACED BEAM-THROUGH STEEL FRAMES

被引：0
|
作者：
Zhang R.-B. [1 ,2 ]
Wang W. [1 ,2 ]
机构：
[1] State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai
[2] Department of Structural Engineering, Tongji University, Shanghai
来源：
Gongcheng Lixue/Engineering Mechanics | 2023年 / 40卷 / 02期
关键词：
beam-through frame; energy factor; evaluation; probabilistic model; seismic design; tension-only braces;
D O I：
10.6052/j.issn.1000-4750.2021.08.0651
中图分类号：
学科分类号：
摘要：
In order to realize the damage-control behavior of tension-only concentrically braced beam-through steel structural systems, the energy factor seismic demand index probability model of the structural system in the damage control stage is firstly established, and then the seismic design and evaluation method is proposed based on the energy factor incorporating the probability model of the seismic demand. A typical three-story tension-only concentrically braced beam-through steel structural system is selected to demonstrate the proposed design and evaluation process. The analysis results show that the structure designed through the seismic design and evaluation process proposed in this paper can achieve damage-control performance, that is, the damage is concentrated in the tension-only braces which can be easily replaced and the main frame remains elastic, thus no obvious residual deformation after earthquakes. Furthermore, the rationality of the method is verified by time history analysis. © 2023 Tsinghua University. All rights reserved.
引用
收藏
页码：179 / 189
页数：10
相关论文
共 27 条
  • [1] WOOD A, NOY I, PARKER M., The canterbury rebuild five years on from the christchurch earthquake [J], Reserve Bank of New Zealand Bulletin, 79, 3, pp. 1-16, (2016)
  • [2] BRUNEAU M, REINHORN A., Overview of the resilience concept [C], Proceedings of the 8th US National Conference on Earthquake Engineering, 2040, pp. 18-22, (2006)
  • [3] LU X, MAO Y, CHEN Y, Et al., New structural system for earthquake resilient design, Journal of Earthquake and Tsunami, 7, 3, (2013)
  • [4] ZHOU Ying, WU Hao, GU Anqi, Earthquake engineering: from earthquake resistance, energy dissipation, and isolation, to resilience, Engineering Mechanics, 36, 6, pp. 1-12, (2019)
  • [5] WANG Wei, ZHAO Yashuo, FANG Cheng, Et al., Development and experimental investigation of self-centering dampers with parallel high strength ring spring groups, Engineering Mechanics, 37, 4, pp. 87-95, (2020)
  • [6] YANG Boya, LYU Xilin, Direct displacement-based aseismic design and application for prestressed precast concrete shear-wall structures, Engineering Mechanics, 35, 2, pp. 59-66, (2018)
  • [7] WANG Wei, CHEN Yiyi, YU Yazhao, Et al., Floor-by-floor assembled steel braced structures for prefabricated buildings, Building Structure, 40, 10, pp. 48-52, (2012)
  • [8] WANG Wei, HU Shuling, ZOU Chao, Et al., The effects of joint behavior on the seismic performance of floor-by-floor assembled steel beam-through braced frames, Engineering Mechanics, 36, 4, pp. 206-213, (2019)
  • [9] DONG B, CHEN Y, WANG W., Self-centering mechanism and seismic response of steel tension-only concentrically braced beam-through frames [J], Structures, 30, pp. 960-972, (2021)
  • [10] HATZIGEORGIOU G D., Behavior factors for nonlinear structures subjected to multiple near-fault earthquakes [J], Computers & Structures, 88, 5, pp. 309-321, (2010)
123