Preparation of high-molecular-weight poly(L-lactic acid)-based polymers through direct condensation polymerization in bulk state

被引：0
|
作者：
Kim, Hun Sik [1 ]
Hwang, Mi Ok [1 ]
Kim, Mal Nam [2 ]
Yoon, Jin San [1 ]
机构：
[1] Department of Polymer Science and Engineering, Inha University, 402-751 Incheon, Korea, Republic of
[2] Department of Biology, Sangmyung University, 110-743 Seoul, Korea, Republic of
来源：
Journal of Applied Polymer Science | 2006年 / 100卷 / 01期
关键词：
Poly(L-lactic acid-co-succinic acid-co-1,4-butanediol) (PLASB) was synthesized by a direct condensation copolymerization of L-lactic acid, succinic acid (SA), and 1,4-butanediol (BD) in bulk state using titanium(IV) butoxide (TNBT) as a catalyst. Weight average molecular weight (Mw) of PLASB increased from 3.5 × 104 to 2.1 × 105 as the content of SA and BD went up from 0.01 to 0.5 mol/100 mol of L-lactic acid (LA). PLASB having Mw in the range from 1.8 × 105 to 2.1 × 105 showed tensile properties comparable to those of commercially available poly(L-lactic acid) (PLLA). In sharp contrast, homopolymerization of LA in bulk state produced PLLA with Mw, as low as 4.1 × 10 4, and it was too brittle to prepare specimens for the tensile tests. Mw of PLASB synthesized by using titanium(IV)-2-ethyl(hexox ide), indium acetate, indium hydroxide, antimony acetate, antimony trioxide, dibutyl tin oxide, and stannous-2-ethyl 1-hexanoate was compared with that of PLASB obtained by TNBT. Ethylene glycol oligomers with different chain length were added to LA/SA in place of BD to investigate effect of chain length of ethylene glycol oligomers on the Mw of the resulting copolymers. Biodegradability of PLASB was analyzed by using the modified Sturm test. Toxicity of PLASB was evaluated by counting viable cell number of mouse fibroblast cells that had been in contact with PLASB discs. © 2006 Wiley Periodicals, Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：466 / 472
相关论文
共 50 条
  • [1] Preparation of high-molecular-weight poly(L-lactic acid)-based polymers through direct condensation polymerization in bulk state
    Kim, HS
    Hwang, MO
    Kim, MN
    Yoon, JS
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (01) : 466 - 472
  • [2] Synthesis of high-molecular-weight poly(L-lactic acid) through the direct condensation polymerization of L-lactic acid in bulk state
    Chen, GX
    Kim, HS
    Kim, ES
    Yoon, JS
    EUROPEAN POLYMER JOURNAL, 2006, 42 (02) : 468 - 472
  • [3] Synthesis of high-molecular-weight poly(l-lactic acid) through the direct condensation polymerization of l-lactic acid in bulk state
    Chen, Guang-Xin
    Kim, Hun-Sik
    Kim, Eung-Soo
    Yoon, Jin-San
    European Polymer Journal, 2006, 42 (02): : 468 - 472
  • [4] Synthesis of high-molecular-weight poly(L-lactic acid) by direct polycondensation
    Kim, KW
    Woo, SI
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 2002, 203 (15) : 2245 - 2250
  • [5] HIGH-MOLECULAR-WEIGHT POLYLACTIC ACID BY DIRECT CONDENSATION POLYMERIZATION OF LACTIC-ACID
    ENOMOTO, K
    AJIOKA, M
    YAMAGUCHI, A
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 207 : 158 - BTEC
  • [6] Preparation and characterization of high-molecular-weight poly(l-lactic acid) by chain-extending reaction with phosphites
    Xie, Ji-Xing
    Yang, Rong-Jie
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 124 (05) : 3963 - 3970
  • [7] Preparation of high molecular weight poly(L-lactic acid) in micro compounder
    Xie, Ji-Xing
    Yang, Rong-Jie
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2008, 24 (09): : 116 - 119
  • [8] High Molecular Weight Poly (L-lactic Acid) Clay Nanocomposites Via Solid-State Polymerization
    Katiyar, Vimal
    Nanavati, Hemant
    POLYMER COMPOSITES, 2011, 32 (03) : 497 - 509
  • [9] Direct condensation polymerization of L-lactic acid catalyzed by distannoxane
    Otera, J
    Kawada, K
    Yano, T
    CHEMISTRY LETTERS, 1996, (03) : 225 - 226
  • [10] Preparation of stereocomplex powder from polycondensation poly(L-lactic acid) and poly(D-lactic acid) for use as a nucleating agent of high-molecular-weight poly(L-lactide)
    Yodthong Baimark
    Prasong Srihanam
    Theeraphol Phromsopha
    Yaowalak Srisuwan
    Journal of Polymer Research, 2023, 30
12345