The influence of milling time and impact force on the mutual diffusion of Al and Cu during synthesis of Al-4.5wt%Cu alloy via mechanical alloying

被引：0
|
作者：
Advanced Materials and Nanotechnology Research Center, Faculty of Mechanical Engineering, K.N.Toosi University of Technology, Tehran, Iran [1 ]
不详 [2 ]
机构：
来源：
Diffus Defect Data Pt A Diffus Forum | 2008年 / 494-498期
关键词：
Mechanical alloying;
D O I：
10.4028/www.scientific.net/ddf.283-286.494
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [1] The Influence of Milling Time and Impact Force on the Mutual Diffusion of Al and Cu During Synthesis of Al-4.5wt%Cu Alloy via Mechanical Alloying
    Mostaed, A.
    Mostaed, E.
    Shokuhfar, A.
    Saghafian, H.
    Rezaie, H. R.
    DIFFUSION IN SOLIDS AND LIQUIDS IV, 2009, 283-286 : 494 - +
  • [2] Effect of SiC particles volume fraction on the mutual diffusion of Al and Cu during fabrication of Al-4.5wt%Cu/SiC via mechanical alloying
    Mostaed, E.
    Mostaed, A.
    Saghafian, H.
    Shokuhfar, A.
    Rezaie, H.R.
    Defect and Diffusion Forum, 2008, 283-286 : 499 - 503
  • [3] Effect of SiC Particles Volume Fraction on the Mutual Diffusion of Al and Cu During Fabrication of Al-4.5wt%Cu/SiC via Mechanical Alloying
    Mostaed, E.
    Mostaed, A.
    Saghafian, H.
    Shokuhfar, A.
    Rezaie, H. R.
    DIFFUSION IN SOLIDS AND LIQUIDS IV, 2009, 283-286 : 499 - +
  • [4] Influence of elec-flux refining on the macrostructure of Al-4.5wt%Cu alloy
    Xiyou Jinshu Cailiao Yu Gongcheng, 1 (41-43):
  • [5] Effect of TiC Particles Volume Fraction on the Mutual Diffusion of Al and Mg during Fabrication of Al-4.5wt%Mg/TiC via Mechanical Alloying Process
    Ozhdelnia, O.
    Shokuhfar, A.
    DIFFUSION IN SOLIDS AND LIQUIDS VII, 2012, 326-328 : 141 - 146
  • [6] Preparation of Nanostructured Al-4.5wt%Mg Powder via Mechanical Alloying Process
    Shokuhfar, Ali
    Ozhdelnia, Omid
    Mostaed, Ali
    Mostaed, Ehsan
    JOURNAL OF NANO RESEARCH, 2011, 13 : 1 - 5
  • [7] EXPERIMENTAL　RESEARCH　ON　DIRECTIONAL　SOLIDIFICATION　OF　Al－4．5wt％Cu　ALLOY　BY　ACRT　METHOD
    JIE Wanqi(State Key Laboratory of Solidification Processing
    Acta Metallurgica Sinica(English Letters), 1996, (01) : 17 - 22
  • [8] Permeability evolution during equiaxed dendritic solidification of Al-4.5wt% Cu
    Khajeh, Ehsan
    Maijer, Daan M.
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2012, 20 (03)
  • [9] The influence of macrosegregation and dendritic arm spacings variation on corrosion resistance of the Al-4.5wt% Cu alloy
    Osorio, Wislei Riuper
    Garcia, Leonardo Richeli
    Peixoto, Leandro Cesar
    Garcia, Amauri
    MATERIA-RIO DE JANEIRO, 2008, 13 (03): : 542 - 552
  • [10] Solid solution in Al-4.5 wt% Cu produced by mechanical alloying
    Fogagnolo, J. B.
    Amador, D.
    Ruiz-Navas, E. M.
    Torralba, J. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 433 (1-2): : 45 - 49
12345