A multi-source model extraction method of digital circuit conducted emission

被引：0
|
作者：
Hao X. [1 ]
Xie S. [1 ]
机构：
[1] School of Electronic and Information Engineering, Beihang University, Beijing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2021年 / 47卷 / 11期
基金：
中国国家自然科学基金;
关键词：
Autocorrelation function; Conducted emission; Digital circuit; Electromagnetic compatibility; Modeling;
D O I：
10.13700/j.bh.1001-5965.2020.0396
中图分类号：
学科分类号：
摘要：
This paper proposes a multi-source model extraction method based on electromagnetic interference element theory to solve the modeling problem of digital circuit electromagnetic conducted emission. Based on the basic emission waveform theory, this paper divides the digital circuit electromagnetic conducted emission model into two parts: basic elements and extended elements. In view of the characteristics of digital circuit clock signals, the trapezoidal pulse sequence is selected as the basic element form, and an improved joint estimation algorithm is proposed to extract the basic element parameters and the corresponding extended element system transfer function model. Aimed at the coexistence of multiple sources of digital circuits, a multi-source identification and separation method based on autocorrelation function is proposed to separate different basic elements from a set of test data, and finally complete the modeling of electromagnetic conducted emission of digital circuits. The simulation and experimental results verify the feasibility and accuracy of the proposed method. © 2021, Editorial Board of JBUAA. All right reserved.
引用
收藏
页码：2287 / 2296
页数：9
相关论文
共 21 条
  • [1] SU D L, XIE S G, DAI F, Et al., The theory and method of quantification design on system-level electromagnetic compatibility, (2015)
  • [2] SU D L, LEI J, WANG B Q., Review and perspective of system-level EMC technologies, Journal of Astronautic Metrology and Measurement, z1, pp. 34-38, (2007)
  • [3] SU D L, WANG B Q, JIN D K, Et al., The prediction techniques of electromagnetic compatability for EW-warfare aircraft, Journal of Beijing University of Aeronautics and Astronautics, 32, 10, pp. 1241-1245, (2006)
  • [4] Electromagnetic emission anol susceptibility requirements and measurements for military equipment and subsystems: GJB 151-2013, (2013)
  • [5] ZHANG Y T, ZHANG H., Electromagnetic compatibility analysis on the embedded stand-alone equipment, Safety and EMC, 5, pp. 57-63, (2012)
  • [6] ZHOU C L, WANG J M, PAN X F, Et al., Modelling and analysis of electromagnetic interferences for a 32-bit digital signal controller, 2012 10th International Symposium on Antennas, Propagation and EM Theony, pp. 1132-1135, (2013)
  • [7] Models of integrated circuits for EMI behavioral simulation ICEM-CE, ICEM conducted emission model: IEC62433-2, pp. 9-11, (2008)
  • [8] CHEN X, XIE S G, DU W, Et al., Active integrated devices PDN vector fitting modeling method, Journal of Beijing University of Aeronautics and Astronautics, 39, 9, pp. 1249-1253, (2013)
  • [9] GHFIRI C, DURIER A, BOYER A, Et al., Methodology of modeling of the internal activity of a FPGA for conducted emission prediction purpose, Electromagnetic Compatibility of Integrated Circuits, pp. 309-314, (2017)
  • [10] GHFIRI C, BOYER A, DURIER A, Et al., A new methodology to build the internal activity block of ICEM-CE for complex integrated circuits, IEEE Transactions on Electromagnetic Compatibility, 99, pp. 1-10, (2017)
123