Hybridizing boron carbide (B4C) particles with aluminum (Al) to enhance the mechanical response of magnesium based nano-composites

被引：0
|
作者：
机构：
[1] [1,Habibi, Meisam K.
[2] Hamouda, Abdelmagid S.
[3] Gupta, Manoj
来源：
Gupta, M. (mpegm@nus.edu.sg) | 1600年 / Elsevier Ltd卷 / 550期
关键词：
In this work; we synthesized and investigated the mechanical performance of magnesium (Mg) nano-composites containing either B4C or hybrid Al-B4C particles (B4C particles hybridized with Al using ball milling) synthesized through powder metallurgy route using microwave assisted rapid sintering technique followed by hot extrusion. Compared to monolithic Mg; microstructural characterizations revealed presence of porosity along the particles boundaries and reduction in average matrix grain size. Among the different nano-composite formulations; the Mg/0.66B4C nano-composite exhibited the best improvement; though marginal; in tensile yield strength (0.2% YS); compressive yield strength (0.2% CYS); ultimate tensile strength (UTS); ultimate compressive strength (UCS) and tensile failure strain (FSt) (up to +10%; +7.5%; +2%; +36%; and; 12%; respectively) compared to pure Mg while compressive failure strain (FSc) was compromised. To improve the mechanical response of Mg/B4C nano-composites further; the best observed B4C content was hybridized with Al to outcome hybrid Al-B4C particles. The effect of presence of hybridized B 4C particles with Al (Al-B4C) in the case of hierarchical Mg/0.92Al-0.66B4C configuration exhibits an improvement of +8.3% (0.2% YS); +29% (0.2% CYS); +45% (UTS) and +6.2 (UCS) compared to its Mg/0.66B4C nano-composite counterpart whereas both FSt and FSc were compromised. Considering the crystallographic texture; the effect of presence of B4C particles (either solely or as hybrid particle forms) on textural evolution of Mg is also investigated here. © 2012 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] Hybridizing boron carbide (B4C) particles with aluminum (Al) to enhance the mechanical response of magnesium based nano-composites
    Habibi, Meisam K.
    Hamouda, Abdelmagid S.
    Gupta, Manoj
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 550 : 83 - 93
  • [2] Hybridizing Micro - B4C With Carbon nanotubes to Enhance The Mechanical Properties of Aluminium Matrix Composites
    Zakaulla, Mohamed
    Arjun, R.
    Khan, Ahmed
    Pasha, Nadeem K.
    Sharieff, Salim
    INTERNATIONAL CONFERENCE ON MATERIALS, ALLOYS AND EXPERIMENTAL MECHANICS (ICMAEM-2017), 2017, 225
  • [3] Impacts of carbon nano tubes (CNT) and boron carbide (B4C) particles on material properties of al 6061
    Maniraj, S.
    Anand, K.
    Anbarasu, R.
    Aravindan, A. Ajay
    Gokul, G.
    Logendran, R.
    MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 738 - 742
  • [4] Deformation twinning in boron carbide particles within nanostructured Al 5083/B4C metal matrix composites
    Li, Y.
    Zhao, Y. H.
    Liu, W.
    Zhang, Z. H.
    Vogt, R. G.
    Lavernia, E. J.
    Schoenung, J. M.
    PHILOSOPHICAL MAGAZINE, 2010, 90 (06) : 783 - 792
  • [5] The mean grain size determination of boron carbide (B4C)-aluminium (Al) and boron carbide (B4C)-nickel (Ni) composites by ultrasonic velocity technique
    Ünal, R
    Sarpün, IH
    Yalim, HA
    Erol, A
    Özdemir, T
    Tuncel, S
    MATERIALS CHARACTERIZATION, 2006, 56 (03) : 241 - 244
  • [6] Using B4C Nanoparticles to Enhance Thermal and Mechanical Response of Aluminum
    Ubaid, Fareeha
    Matli, Penchal Reddy
    Shakoor, Rana Abdul
    Parande, Gururaj
    Manakari, Vyasaraj
    Mohamed, Adel Mohamed Amer
    Gupta, Manoj
    MATERIALS, 2017, 10 (06):
  • [7] Influence of B4C Nano Particles on Microstructure and Mechanical Properties of Al6063 Alloy Composites
    Reddy, B. Byra
    Bharathesh, T. P.
    THIRD INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS (ICMSS 2020), 2021, 2327
  • [8] Mechanical Loading and Tribological Studies on Boron Carbide (B4C) and Lead (Pb) Particles Dispersed Epoxy-Based Multilayered Composites
    Vignesh, S.
    Jappes, J. T. Winowlin
    Adam, Khan M.
    Varol, Temal
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [9] Production and characterization of hybrid aluminum matrix composites reinforced with boron carbide (B4C) and graphite
    Thirumalai, T.
    Subramanian, R.
    Kumaran, S.
    Dharmalingam, S.
    Ramakrishnan, S. S.
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2014, 73 (10): : 667 - 670
  • [10] Evaluation of drilling Al/B4C composites with carbide drills
    Motorcu, Ali Riza
    Ekici, Ergun
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2016, 22 (04): : 259 - 266
12345