Machining simulation and system integration combining FE analysis and cutting mechanics modelling

被引：0
|
作者：
Ratchev, Svetan [1 ]
Liu, Shulong [1 ]
Huang, Wei [1 ]
Becker, Adib A. [1 ]
机构：
[1] School of Mechanical, Materials, Manufacturing Engineering, University of Nottingham, Nottingham NG7 2RD, United Kingdom
来源：
International Journal of Advanced Manufacturing Technology | 2007年 / 35卷 / 1-2期
关键词：
In this paper; the machining process to produce the right surface profile in machining low-rigidity parts is studied by considering moving dynamic cutting forces that statically and dynamically excite the tool and part reducing the validity of these packages' output and leading to additional surface errors. The proposed approach is based on producing a simulation environment integrating a data model; an analytical force prediction model; a material removal model and an FE analysis commercial software package. This reported result focuses on the development of the simulation environment and the data model. The integrated environment provides a platform by which FE analysis commercial packages; ABAQUS; can exchange data with the proposed data model; force model and material removal model; to deliver new functionality for machining process simulation where there is force-induced part deflection. The data model includes complete mesh and analysis information for predicting part deflection and enables iterative data updating for multi-step simulation. The proposed simulation methodology has been experimentally validated. © 2006 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：55 / 65
相关论文
共 50 条
  • [1] Machining simulation and system integration combining FE analysis and cutting mechanics modelling
    Svetan Ratchev
    Shulong Liu
    Wei Huang
    Adib A. Becker
    The International Journal of Advanced Manufacturing Technology, 2007, 35 : 55 - 65
  • [2] Machining simulation and system integration combining FE analysis and cutting mechanics modelling
    Ratchev, Svetan
    Liu, Shulong
    Huang, Wei
    Becker, Adib A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 35 (1-2): : 55 - 65
  • [3] A fracture mechanics analysis of cutting and machining
    Williams, J. G.
    Patel, Y.
    Blackman, B. R. K.
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (02) : 293 - 308
  • [4] Integrated modelling and analysis of micro-cutting mechanics with the precision surface generation in abrasive flow machining
    Yizhi Shao
    Kai Cheng
    The International Journal of Advanced Manufacturing Technology, 2019, 105 : 4571 - 4583
  • [5] Integrated modelling and analysis of micro-cutting mechanics with the precision surface generation in abrasive flow machining
    Shao, Yizhi
    Cheng, Kai
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 105 (11): : 4571 - 4583
  • [6] A mechanics of cutting analysis in orthogonal machining with tool flank wear
    Wang, J
    ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, 1999, : 357 - 367
  • [7] Simulation analysis of cutting performance of diamond in titanium machining
    Maekawa, K
    Nakano, Y
    INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1996, 30 (02): : 144 - 145
  • [8] SIMULATION ANALYSIS OF CUTTING MECHANISM IN PLASMA HOT MACHINING
    MAEKAWA, K
    KITAGAWA, T
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1986, 20 (04): : 285 - 286
  • [9] FE modelling of CFRP machining- prediction of the effects of cutting edge rounding
    Duboust, Nicolas
    Pinna, Christophe
    Ghadbeigi, Hassan
    Collis, Andrew
    Ayvar-Soberanis, Sabino
    Kerrigan, Kevin
    Scaife, R.
    17TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (17TH CIRP CMMO), 2019, 82 : 59 - 64
  • [10] Macro-modelling of orthotropic damage in masonry: Combining micro-mechanics and continuum FE analysis
    Drougkas, Anastasios
    ENGINEERING FAILURE ANALYSIS, 2022, 141
12345