A model research for prototype warp deformation in the FDM process

被引：0
|
作者：
Wang, Tian-Ming [1 ]
Xi, Jun-Tong [1 ]
Jin, Ye [1 ]
机构：
[1] Institute of Computer Integrated Manufacturing, School of Mechanical and Power Engineering, Shanghai Jiaotong University, No. 1954, HuaShan Road, Shanghai 200030, China
来源：
International Journal of Advanced Manufacturing Technology | 2007年 / 33卷 / 11-12期
关键词：
In rapid prototyping (RP) technology; prototypes are constructed by the sequential deposition of material layers. When the deposition process involves temperature gradients; thermal stresses will develop. In this paper; the prototype deformation in fused deposition modeling (FDM) processes is studied; and the essence of the deformation and the interacting principles are analyzed. According to basic hypotheses and simplifications; the mathematical model of the prototype warp deformation is constructed; and each of the influencing factors concretely; including the deposition layers number n; the stacking section length L; the chamber temperature T e; and the material linear shrinkage rate α; is quantificationally analyzed. Based on the analysis results; some issues and phenomena in the FDM process are rationally explained. Furthermore; the improving methods for the reduction of the prototype warp deformation are proposed; and the applying effect is better. © 2006 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1087 / 1096
相关论文
共 50 条
  • [1] A model research for prototype warp deformation in the FDM process
    Tian-Ming Wang
    Jun-Tong Xi
    Ye Jin
    The International Journal of Advanced Manufacturing Technology, 2007, 33 (11-12) : 1097 - 1097
  • [2] A model research for prototype warp deformation in the FDM process
    Tian-Ming Wang
    Jun-Tong Xi
    Ye Jin
    The International Journal of Advanced Manufacturing Technology, 2007, 33 : 1087 - 1096
  • [3] Prototype warp deformation in the FDM process
    School of Mechanical and Power Engineering, Shanghai Jiaotong University, Shanghai 200030, China
    Jixie Gongcheng Xuebao, 2006, 3 (233-238):
  • [4] A model research for prototype warp deformation in the FDM process (vol 33, pg 1097, 2007)
    Wang, Tian-Ming
    Xi, Jun-Tong
    Jin, Ye
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 33 (11-12): : 1097 - 1097
  • [5] Research on model of extruding filament and compensation method of prototype dimensions in FDM
    Jia, Zhenyuan
    Zou, Guolin
    Guo, Dongming
    Wang, Dongxing
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2002, 13 (23):
  • [6] Research on the Interlayer Stress and Warpage Deformation in FDM
    Peng Anhua
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1564 - 1567
  • [7] Precision Model of Predicting FDM Rapid Prototype Based on BP Neural Network
    Shang, G. Q.
    Sun, C. H.
    Chen, X. F.
    Du, J. H.
    MANUFACTURING AUTOMATION TECHNOLOGY, 2009, 392-394 : 891 - 897
  • [8] The Analysis of Key Influence Factors and Application Countermeasures on Quality of FDM Prototype Model
    Hou Qingquan
    Zhao Can
    FRONTIER IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 136 : 122 - 125
  • [9] Precision model of predicting FDM rapid prototype based on BP neural network
    Shang, G.Q.
    Sun, C.H.
    Chen, X.F.
    Du, J.H.
    Key Engineering Materials, 2009, 392-394 : 891 - 897
  • [10] Research of Product Prototype Model
    Xie, Zhibin
    Zhou, Yuexi
    ADVANCED RESEARCH ON AUTOMATION, COMMUNICATION, ARCHITECTONICS AND MATERIALS, PTS 1 AND 2, 2011, 225-226 (1-2): : 1153 - +
12345