Numerical simulation of loosening law of bolted joints under lateral vibration

被引：0
|
作者：
Zhao, Weiping [1 ]
Chang, Haotan [1 ]
Ji, Chunlei [2 ]
Guo, Xinsuo [1 ]
He, Yuxiang [1 ]
机构：
[1] School of Mechanics and Civil Engineering, China University of Mining and Technology (Beijing), Beijing,100083, China
[2] China Railway 16st Bureau Group Road & Bridge Engineering Co., Ltd., Beijing,101500, China
来源：
Zhendong yu Chongji/Journal of Vibration and Shock | 2024年 / 43卷 / 08期
关键词：
The bolted connection joints of transmission towers often experience loosening due to transverse cyclic loads; resulting in damage to the transmission towers. Currently; many single-bolt tests conducted on vibration test machines and finite element studies are not applicable to the actual working conditions of angle steel-bolt group joints due to bolt constraint issues. To address this problem; a refined bolt model considering thread incline was established in ABAQUS. The applicability of the finite element model was verified based on the results of fastener tests. The bolt model was then extended to complex single-limb; single-wrap; and double-wrap angle steel-bolt group joint models to analyze the loosening mechanism and pre-tension variation process of bolt group joints under transverse vibration loads. Analysis results show that under transverse cyclic loads; the pre-tension alternates between increasing and decreasing. The thread contact surface enters the slip state before the pressure surface of the bolt head. With an increase in the friction coefficient and pre-torque; the decreasing trend of pre-tension becomes smaller. With an increase in vibration amplitude; the decreasing trend of pre-tension becomes larger. The vibration frequency has negligible impact on bolt loosening. The degree of bolt loosening in single-wrap and double-wrap joints gradually decreases from the outer side to the inner side. Applying preload will reduce the tendency of bolt loosening to some extent. The degree of loosening for double-limbsingle-packet joint bolts decreases by 16. 00% to 23. 24%; and for double-limbdouble-packet joint bolts; it decreases by 2. 63% to 3. 80% . Therefore; it is important to monitor the easily loosened bolt locations in actual engineering to ensure the load-bearing capacity of the joints. © 2024 Chinese Vibration Engineering Society. All rights reserved;
D O I：
10.13465/j.cnki.jvs.2024.08.007
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：61 / 69
相关论文
共 50 条
  • [1] Self-loosening mechanism of bolted joints under vibration
    Wang, Wei
    Xu, Hao
    Ma, Yue
    Liu, Hai-Ping
    Zhendong yu Chongji/Journal of Vibration and Shock, 2014, 33 (22): : 198 - 202
  • [2] Numerical Simulation of Self-Loosening of Bolted Joints under Cyclic Transverse Loads
    Hou, Shiyuan
    Liao, Ridong
    MECHANICAL STRUCTURES AND SMART MATERIALS, 2014, 487 : 488 - 493
  • [3] A study of loosening and fatigue failure of bolted joints under transverse vibration
    Department of Mechanical Engineering, Kurume National College of Technology, 1-1-1 Komorino, Kurume-shi, Fukuoka, 830-8555, Japan
    不详
    Nihon Kikai Gakkai Ronbunshu C, 2006, 4 (1297-1304):
  • [4] Mechanisms and prevention of vibration loosening in bolted joints
    Fernando, Saman
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2005, 2 (02) : 73 - 92
  • [5] RESEARCH ON SELF-LOOSENING MECHANISM OF BOLTED JOINTS UNDER TRANSVERSAL VIBRATION
    Wang, Wei
    Wang, Qingli
    Zheng, Shuai
    Liu, Xiaowei
    Liu, Haiping
    ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 4B, 2015,
  • [6] Experimental study on the loosening of the bolted joints of a transmission tower under transverse vibration
    Zhao, Wei-Ping
    Guo, Xinsuo
    Wang, Na
    Xu, Yang
    Zhu, Binrong
    Zhendong yu Chongji/Journal of Vibration and Shock, 2025, 44 (02): : 84 - 93
  • [7] VIBRATION LOOSENING PERFORMANCE OF ADDITIVELY-MANUFACTURED BOLTED JOINTS
    Gerini-Romagnoli, Marco
    De Agostinis, Massimiliano
    Nassar, Sayed A.
    Tedlapu, Khushboo
    PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 3, 2023,
  • [8] Self-loosening Process Simulation of Bolted Joints in 12kV Vacuum Circuit Breakers under Vibration
    Liu, Guangwei
    Wang, Lijun
    Jia, Shenli
    Yang, Ren
    2017 4TH INTERNATIONAL CONFERENCE ON ELECTRIC POWER EQUIPMENT-SWITCHING TECHNOLOGY (ICEPE-ST), 2017, : 668 - 672
  • [9] Loosening behavior of bolted joints under transverse cyclic loading
    Hattori, T
    Nakamura, M
    Sato, S
    Umeki, T
    EXPERIMENTAL MECHANICS, VOLS 1 AND 2: ADVANCES IN DESIGN, TESTING AND ANALYSIS, 1998, : 35 - 39
  • [10] Study on Loosening Process of Bolted Joints Under Transverse Load
    Hu Y.
    Jiang D.
    Wang M.
    Cao Z.
    Fei Q.
    Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, 2020, 40 (06): : 1091 - 1098
12345