Non-destructive Characterization of Physical Parameters in Random Packing Systems of Explosive Molding Granules

被引：0
|
作者：
Yue H.-L. [1 ]
Zhang C. [1 ]
Zhang W.-B. [1 ]
机构：
[1] Institute of Chemical Materials, CAEP, Mianyang
来源：
Hanneng Cailiao/Chinese Journal of Energetic Materials | 2024年 / 32卷 / 04期
基金：
中国国家自然科学基金;
关键词：
explosive molding granule; porosity; random packing system; volume fraction; X-ray tomography;
D O I：
10.11943/CJEM2023157
中图分类号：
学科分类号：
摘要：
The molding granule is an intermediate for polymer-bonded explosive (PBX) components. Characterization of the physical parameters of granular system is of great significance to understanding the influence of different granule structure on the performance of PBX components. X-ray computed micro-tomography (XCT) and CT image processing were used to non-destructively characterize physical parameters(including granule diameter, volume fraction, porosity, sphericity and intrinsic density)of the granular random packing systems. The average granule diameter of granular systems is up to 1.04 mm, the volume fraction is up to 68.7%, the lowest porosity is 1.04%, the highest average sphericity is 0.93, and the highest density is 1.44 g·cm-3. Results show that the type of binder, composition and ratio of explosive crystals, and granulation process have a pronounced influence on the physical parameters of granular packing systems. Moreover, there is a correlation between physical parameters of granular systems. The more dispersed diameter distribution of granular system leads to the larger the average surface area of granules. The larger average granule diameter and lower average sphericity of granular system result in the higher porosity of the granules. The volume fraction of granular systems with larger average granule diameter is higher, and the volume fraction of the granule accumulation is independent of the sphericity when the average sphericity is large. This research provides fundamental insights into understanding the physical parameters and their associations with material properties in molding granular packing systems. © 2024 Institute of Chemical Materials, China Academy of Engineering Physics. All rights reserved.
引用
收藏
页码：345 / 352
页数：7
相关论文
共 19 条
  • [1] MA Yin - xiang, LIU Chen, WANG Hui, Et al., Mechanical property of the single TATB granule by uniaxial compression [J], Chinese Journal of Energetic Materials(Hanneng Cailiao), 28, 10, pp. 960-968, (2020)
  • [2] ZHANG Wei-bin, TIAN Yong, DAI Bin, Et al., Characterization of TATB molding powder by x-ray sub-micron tomography [J], Chinese Journal of Energetic Materials(Hanneng Cailiao), 25, 2, pp. 173-176, (2017)
  • [3] DAI Bin, TIAN Yong, ZHANG Wei-bin, Et al., X-ray tomography of structural evolution of TATB granules during compaction, Chinese Journal of Energetic Materials(Hanneng Cail‑ iao), 23, 10, pp. 982-988, (2015)
  • [4] Pang W, Fan X, Wang K, Et al., Al-based nano-sized composite energetic materials(Nano-CEMs)：Preparation, characterization, and performance[J], Nanomaterials, 10, 6, (2020)
  • [5] LIU Yu-cun, WANG Jian-hua, AN Chong-wei, Et al., Effect of granule size of RDX on mechanical sensitivity[J], Chinese Jour‑ nal of Explosives & Propellants, pp. 7-9, (2004)
  • [6] Chakravarthy SUNADA, Gonthier A, Analysis of microstructure-dependent shock dissipation and hot-spot formation in granular metalized explosive[J], Journal of Applied Physics, 120, 2, (2016)
  • [7] SIVIOUR C R, GIFFORD M J, WALLEY S M, Et al., Granule size effects on the mechanical properties of a polymer bonded explosive[J], Journal of Materials Science, 39, 4, pp. 1255-1258, (2004)
  • [8] GUO Hu, LUO Jing-run, SHI Ping-an, Et al., Research on the fracture behavior of PBX under static tension[J], Defence Tech‑ nology, 10, 2, pp. 154-160, (2014)
  • [9] WANG Yan-jun, ZOU Xiang, PAN bing, Et al., 3D deformation measurement in TATB based pbx based on digital volume correlation with μ-computed tomography[J], Chinese Journal of Energetic Materials(Hanneng Cailiao), 30, 12, pp. 1272-1281, (2022)
  • [10] SPITZER D, COMET M, BARAS C, Et al., Energetic nano-materials：Opportunities for enhanced performances[J], Journal of Physics and Chemistry of Solids, 71, 2, pp. 100-108, (2009)
12