Mechanical Properties of Ordinary Concrete Confined with Engineered Cementitious Composites (ECC)

被引：0
|
作者：
Kang Y. [1 ,2 ,3 ]
Guo Z. [4 ]
Ye B. [4 ]
Pan P. [4 ,5 ]
机构：
[1] State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures, Shijiazhuang Tiedao University, Shijiazhuang
[2] Innovation Center for Wind Engineering and Wind Energy Technology of Hebei Province, Shijiazhuang
[3] School of Civil Engineering, Shijiazhuang Tiedao University, Shijiazhuang
[4] Department of Civil Engineering, Tsinghua University, Beijing
[5] Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Tsinghua University, Beijing
来源：
Cailiao Daobao/Materials Reports | 2024年 / 38卷 / 03期
关键词：
composite specimen; ductile failure; engineered cementitious composites (ECC); high toughness; mechanical property;
D O I：
10.11896/cldb.22050021
中图分类号：
学科分类号：
摘要：
Composite specimens of ordinary concrete confined with engineered cementitious composites(ECC)were prepared,considering the comprehensive utilization of the advantage of ECC in mechanical properties and the low price of ordinary concrete. Tests of compressive,tensile, and flexural were carried out,and the basic mechanical properties of composite specimens were systematically studied. The bending behavior of reinforced composite beams was also studied by numerical analysis method. The results show that the interface between ECC and concrete did not slip when the composite specimen was damaged by force,and the two materials bonded reliably to achieve synergistic stresses. Compared with ordinary concrete specimens,the compressive strength,tensile strength and flexural strength of composite specimens are improved,especially the flexural strength are most significantly improved. For the beam with a section of 100 mm×100 mm,the flexural strength is increased by 27. 4% and 57. 1% respectively,when the thickness of ECC is 10 mm and 15 mm. The composite specimen has considerable ductile deformation ability,and can maintain a certain integrity after failure,so it has the characteristics of high toughness. Compared with ordinary reinforced concrete beams,reinforced composite beams can take advantage of the performance advantages of ECC to significantly improve the bearing and deformation capacity. © 2024 Cailiao Daobaoshe/ Materials Review. All rights reserved.
引用
收藏
相关论文
共 22 条
  • [1] Gao L, Guo E D, Zhao Y, Et al., China Civil Engineering Journal, 49, 3, (2016)
  • [2] Xu S L, Li H D., China Civil Engineering Journal, 41, 6, (2008)
  • [3] Li Q H, Xu S L., Engineering Mechanics, 26, (2009)
  • [4] Wang Y C, Hou M J, Yu J T, Et al., Materials Reports, 32, 10, (2018)
  • [5] Wang Z B, Zhang J, Wang Q., Journal of Building Materials, 21, 2, (2018)
  • [6] Hu C H, Gao Y E, Ding W C., Journal of Building Structures, 34, 12, (2013)
  • [7] Li Q H, Huang B T, Zhou B M, Et al., Journal of Building Structures, 37, 1, (2016)
  • [8] Liu Z J, Li Y, Wen C G., Journal of Building Materials, 19, 4, (2016)
  • [9] Cao M L, Xu L, Zhang C., Journal of the Chinese Ceramic Society, 43, 5, (2015)
  • [10] Ma H Q, Cheng Y, Wu C., Construction and Building Materials, 287, (2021)
123