Fretting wear behavior and wear mechanism of IN738LC alloy formed by selective laser melting

被引：0
|
作者：
Hu Y. [1 ,2 ]
Zhang X. [1 ,2 ]
Jia H. [1 ,2 ]
Wang S. [1 ,2 ,3 ]
Chai L. [3 ]
机构：
[1] State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou
[2] School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou
[3] State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2024年 / 34卷 / 04期
关键词：
displacement amplitude; fretting wear; IN738LC alloy; selective laser melting; wear mechanism;
D O I：
10.11817/j.ysxb.1004.0609.2023-44654
中图分类号：
学科分类号：
摘要：
In this paper, tangential fretting wear experiments on IN738LC alloy produced by SLM technology were carried out using a high-precision fretting friction and wear testing machine (SRV-V) in the point contact mode of ball-on-flat, and the fretting wear behavior of specimens and their wear mechanisms were systematically investigated for different displacement amplitudes (50, 100, 150 and 200 μm) under constant load conditions (50 N). The results indicate that the friction coefficient and wear volume of the specimen gradually increase with the increase of displacement amplitude. The fretting wear evolves gradually from the mixed fretting regime to the gross slip regime. The wear mechanism for the 50 μm specimen is characterized by slight oxidation wear and fatigue wear, while that of the 200 μm specimen involves oxidation wear, fatigue wear and abrasive wear. Additionally, the distribution of micro-cracks in abrasion mark is significantly reliant on the micro-motion regime type, fretting cracks can occur both at the intersection of adhesion and slip regime and within the gross slip regime. The wear mark shape transforms from circular to oval as a result of the ploughing activity of the mark edges. © 2024 Central South University of Technology. All rights reserved.
引用
收藏
页码：1393 / 1404
页数：11
相关论文
共 42 条
  • [1] KUNZE K, ETTER T, GRASSLIN J, Et al., Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM), Materials Science and Engineering A, 620, pp. 213-222, (2015)
  • [2] HU Y, ZHANG H Y, KANG W J, Et al., High temperature oxidation behavior of IN738LC alloy formed by selective laser melting, Journal of Materials Science, 57, 25, pp. 11983-11996, (2022)
  • [3] RICKENBACHER L, ETTER T, HOVEL S, Et al., High temperature material properties of IN738LC processed by selective laser melting (SLM) technology, Rapid Prototyping Journal, 19, 4, pp. 282-290, (2013)
  • [4] YUAN K B, GUO W G, LI P H, Et al., Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser metal deposition, Materials Science and Engineering A, 721, pp. 215-225, (2018)
  • [5] POLLOCK T M, TIN S., Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties, Journal of Propulsion and Power, 22, 2, pp. 361-374, (2006)
  • [6] SOTOV A V, AGAPOVICHEV A V, SMELOV V G, Et al., Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting, The International Journal of Advanced Manufacturing Technology, 107, 5, pp. 2525-2535, (2020)
  • [7] XU D, GAO H B, DONG T, Et al., Research progress of metal powder for additive manufacturing, The Chinese Journal of Nonferrous Metals, 31, 2, pp. 245-257, (2021)
  • [8] WANG W H, LIN W H, YANG R, Et al., Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature, Materials & Design, 213, (2022)
  • [9] JIA Z, WANG Y J, JI J J, Et al., The effect of the strain rate on the fretting wear properties of thermally compressed inconel 625 alloy, Advanced Engineering Materials, 22, 11, (2020)
  • [10] XU Z B, LI D X, WANG Z, Et al., Tangential fretting wear characteristics of inconel 718 laser melting alloy layer, Tribology, 43, 5, pp. 517-527, (2023)
12345