A Variable Topology Multi-Resonant Soft-Switching DC-DC Converter with High Efficiency and Wide Gain

被引:0
|
作者
Chen M. [1 ]
Wang Y. [1 ]
Chen Q. [2 ]
Yang L. [3 ]
Han F. [4 ]
机构
[1] School of Electrical and Information Engineering, Tianjin University, Tianjin
[2] State Grid Jiangsu Electric Power Co. Ltd, Nanjing
[3] National Electric Power Dispatching and Control Center, State Grid Corporation of China, Beijing
[4] State Grid Nanjing Power Supply Company, Nanjing
关键词
DC-DC converter; Loss analysis; Multi-resonant; Soft switching; Variable topology;
D O I
10.19595/j.cnki.1000-6753.tces.L90293
中图分类号
学科分类号
摘要
A variable topology multi-resonant soft-switching DC-DC converter is proposed in this paper. Applying the double transformer structure, this converter can transform the topological structure through two complementary turn-on auxiliary switches. There are three working modes, which can meet the requirements of high voltage gain or high efficiency under different working conditions. In addition, resonant parameters of the converter are designed by setting the resonant frequency and gain point reasonably. Subsequently, according to the condition that the converter transmits the fundamental and third harmonic energy simultaneously under rated conditions, a loss model considering both the fundamental wave and the third harmonic is constructed, and the loss distribution of the converter is estimated in detail. Finally, in order to verify the reliability of the theoretical analysis, this paper conducted a power experiment on the converter based on an experimental prototype. Within the input voltage range of 80~600V, the output voltage is always stable at 400V, and a wide voltage gain range is obtained. At the same time, high efficiency conversion within the full gain range is achieved, and the maximum efficiency of the converter is 97.6%. © 2021, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码:4225 / 4236
页数:11
相关论文
共 17 条
  • [1] Xu Litong, Cheng Ming, Wei Xinchi, Et al., Power signal feedback control of maximum power point tracking control for brushless doubly-fed wind power generation system considering loss, Transactions of China Electrotechnical Society, 35, 3, pp. 472-480, (2020)
  • [2] Wang Tao, Zhu Ziqiang, Nian Heng, Review of operation technology of doubly-fed induction generator-based wind power system under nonideal grid conditions, Transactions of China Electrotechnical Society, 35, 3, pp. 455-471, (2020)
  • [3] Yan Xiangwu, Song Zijun, Cui Sen, Et al., Primary frequency regulation strategy of doubly-fed wind turbine based on variable power point tracking and supercapacitor energy storage, Transactions of China Electrotechnical Society, 35, 3, pp. 82-93, (2020)
  • [4] Yang Bo, Chen Rengang, Lee F C., Integrated magnetic for LLC resonant converter, IEEE Applied Power Electronics Conference and Exposition, pp. 346-351, (2002)
  • [5] Yang Bo, Lee F C, Concannon M., Over current protection methods for LLC resonant converter, IEEE Applied Power Electronics Conference and Exposition, pp. 605-609, (2003)
  • [6] Raju G S N, Doradla S., An LCL resonant converter with PWM control-analysis, simulation, and implementation, IEEE Transactions on Power Electronics, 10, 2, pp. 164-174, (2002)
  • [7] Tang Xinxi, Xing Yan, Wu Hongfei, Et al., An improved LLC converter considering steady-state efficiency and transient boost capability, Transactions of China Electrotechnical Society, 35, 4, pp. 93-100, (2020)
  • [8] Canales F, Barbosa P, Aguilar C, Et al., A high-power-density DC/DC converter for high-power distributed power systems, IEEE Power Electronics Specialist Conference, pp. 11-18, (2003)
  • [9] Yang Dongjiang, Duan Bin, Ding Wenlong, Et al., An improved LLC resonant converter with auxiliary bi-directional switch for wide-input-voltage range applications, Transactions of China Electrotechnical Society, 35, 4, pp. 775-785, (2020)
  • [10] Yu R, Ho G K Y, Pong B M H, Et al., Computer-aided design and optimization of high-efficiency LLC series resonant converter, IEEE Transactions on Power Electronics, 27, 7, pp. 3243-3256, (2012)