Compliance Control Strategy of Parallel Robot Based on External Force Estimation

被引：0
|
作者：
Ni T. [1 ]
Sun X. [1 ]
Li D. [2 ]
Zhao Y. [1 ]
Zhang P. [1 ]
Deng Y. [3 ]
机构：
[1] College of Vehicle and Energy, Yanshan University, Qinhuangdao
[2] College of Mechanical and Aerospace Engineering, Jilin University, Changchun
[3] College of Mechanical Engineering, Yanshan University, Qinhuangdao
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2022年 / 53卷 / 08期
关键词：
compliance control; external force estimation; impedance control; parallel robot;
D O I：
10.6041/j.issn.1000-1298.2022.08.048
中图分类号：
学科分类号：
摘要：
Aiming at the problem of precise position control and compliance control of parallel robot in the process of operation, a compliance control strategy of parallel robot based on external force estimation was proposed. The compliance strategy can realize the high-performance dynamic interaction between position and force of parallel robot in the process of operation. In the implementation of compliance control based on external force estimation, considering the high cost of contact force sensor, a sensorless external force estimation method was proposed. Firstly, the dynamic model of parallel robot and the dynamic model of servo motion system were established, and the changes of robot joint force under external force were estimated by using the established dynamic model and the current feedback value of motor. Secondly, according to the estimated joint force of the parallel robot, the position based impedance control was designed. The position based impedance control can change the rigid contact between the end effector of the parallel robot and the environment into flexible contact, so as to ensure the operation accuracy and compliance of the parallel robot. Finally, the appropriate impedance control parameters were selected to simulate and analyze the proposed compliance control strategy, and the experimental verification was carried out on the built experimental platform. The experimental results showed that the proposed method can realize the accurate, stable and fast compliance operation of the parallel robot. © 2022 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码：443 / 451
页数：8
相关论文
共 25 条
  • [1] TAN Min, WANG Shuo, Research progress of robot technology, Journal of Automation, 39, 7, pp. 963-972, (2013)
  • [2] WANG Tianran, Development of robot technology, Robot, 39, 4, pp. 385-386, (2017)
  • [3] ZHANG Qingyun, ZHAO Xinhua, LIU Liang, Et al., Dynamic modeling and vibration simulation of spatial flexible closed-chain robot, Transactions of the Chinese Society for Agricultural Machinery, 52, 1, pp. 401-409, (2021)
  • [4] NEVILLE H., Impedance control: an approach to manipulation: part 玉—theory, Journal of Dynamic Systems Measurement and Control, 107, 1, pp. 1-7, (1985)
  • [5] LI Q, MENG F, YU Z, Et al., Dynamic Torso compliance control for standing and walking balance of position-controlled humanoid robots[ J], IEEE / ASME Transactions on Mechatronics, 26, 2, pp. 679-688, (2021)
  • [6] HOGAN N., Stable execution of contact tasks using impedance control [ C], 椅 IEEE International Conference on Robotics & Automation, (1987)
  • [7] HE Yintong, Research on gas liquid servo impedance control system based on position, (2008)
  • [8] LIU Cuicui, Research on gas liquid servo impedance control system based on force, (2008)
  • [9] BROENINK J F, TIERNEGO M., Peg-in-hole assembly using impedance control with a 6 DOF robot [ C], 椅 Proceedings 8th European Simulation Symposium, (1996)
  • [10] CHAN S P, LIAW H C., Impedance control strategy for robotic assembly tasks [ C], 椅 Conference of the IEEE Industrial Electronics Society, (1995)
123