Effect of simplifying metro train bottom geometric structure on flow and motor heat dissipation

被引：0
|
作者：
Ma, Jiangchuan [1 ,2 ]
Yang, Mingzhi [1 ,2 ]
Qian, Bosen [1 ,2 ]
机构：
[1] Key Laboratory of Traffic Safety on Track, Ministry of Education, School of Traffic & Transportation Engineering, Central South University, Changsha,410075, China
[2] Joint International Research Laboratory of Key Technology for Rail Traffic Safety, Central South University, Changsha,410075, China
来源：
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) | 2024年 / 55卷 / 05期
关键词：
In numerical simulation; the simplification of geometrical structures can effectively improve the computational efficiency and reduce the computational cost. In this study; a three-dimensional; constant; compressible Reynolds-averaged Navier-stokes (RANS) equation-based model with thermal radiation was used to investigate the effects of three simplified models (A; B and C) of the bottom structure on the bottom flow field of a subway train as well as on the surface temperature distribution of the linear motors; and evaluate the computational accuracy and efficiency of the simplified models. The results show that the simplification of the bottom structure reduces the wake area behind the motor; which enhances the bottom flow. The more simplified the model; the higher the flow rate of the cooling air; and the circulation of the traveling air can be affected by the simplified geometric structure. The increase of cooling air flow affects the convective heat transfer of the motors; and compared with the original model; the three simplified models make the average value of the temperature of each motor decrease by 1.2%; 2.4%; and; 7.5%; respectively. In order to improve the calculation efficiency on the premise of guaranteeing the calculation accuracy; considering the flow field distribution law and the temperature field calculation results of the underbody; only the structure of wheel axle; brake disk; transverse tie rod and suspension device of the bogie of the original model should be simplified. © 2024 Central South University of Technology. All rights reserved;
D O I：
10.11817/j.issn.1672-7207.2024.05.006
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：1723 / 1733
相关论文
共 50 条
  • [1] Effect of geometric changes on the flow and heat transfer in the end region of a TEFC induction motor.
    Mugglestone, J
    Pickering, SJ
    Lampard, D
    NINTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND DRIVES, 1999, (468): : 40 - 44
  • [2] EFFECT OF RANDOM OCEAN BOTTOM ON HEAT FLOW MEASUREMENTS
    NAIDU, PS
    TRANSACTIONS-AMERICAN GEOPHYSICAL UNION, 1969, 50 (04): : 206 - &
  • [3] EFFECT OF RADIATION AND HEAT DISSIPATION ON MHD CONVECTIVE FLOW IN PRESENCE OF HEAT SINK
    Akhtar, Salma
    Borah, Keshab
    Chakraborty, Shyamanta
    EAST EUROPEAN JOURNAL OF PHYSICS, 2023, (03): : 471 - 478
  • [4] Improvement of Heat Dissipation Structure of Low Speed Permanent-Magnet Motor
    Xia, Yunyan
    Lv, Sijia
    Jing, Bo
    Zhou, Zhou
    IEEE ACCESS, 2023, 11 : 51789 - 51797
  • [5] Optimization Design of Heat Dissipation Structure of Integrated Motor Drives for Application in Aerospace
    Tian Wei
    Qian Hao
    Guo Hong
    Xu Jinquan
    2017 20TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2017,
  • [6] Effect of Heat sink structure improvement on heat dissipation performance in high heat flux
    Cui, Zhuo
    PROCEEDINGS OF THE ASME 5TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, 2016, VOL 1, 2016,
  • [7] Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis
    Li, Tong
    Fang, Youtong
    Ma, Jien
    Liang, Sizhuang
    Shi, Cenwei
    2015 18TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2015, : 1752 - 1756
  • [8] Heat Dissipation Characteristics and Experimental Research of Aviation Oil Cooling Motor Based on Spiral Insulation Flow Channel Structure in Slot
    Bao, Bingyan
    Xiong, Bin
    Li, Zuming
    Zhang, Zhuoran
    IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION, 2025, 11 (01): : 2322 - 2331
  • [9] Study of the effect of Si/Dia interface structure on heat dissipation
    Wu, Yufeng
    Xie, An
    Jian, Xiaodong
    Yang, Xiaofeng
    2023 24TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2023,
  • [10] Research on heat dissipation capacity of hub motor stator with graphene composite insulation structure
    Tao, Da-Jun
    Pan, Bo
    Ge, Bao-Jun
    Wang, Li-Kun
    Hou, Peng
    Xu, Xiao
    Dianji yu Kongzhi Xuebao/Electric Machines and Control, 2021, 25 (06): : 91 - 100
12345