Effect of cryogenic treatment on microstructure and mechanical properties of 7A62 Al alloy

被引：0
|
作者：
Liu W. [1 ,2 ]
Li L. [1 ]
Huang H. [3 ]
Yu J. [3 ]
Song Y. [1 ]
Hu Q. [1 ]
Yue X. [1 ]
机构：
[1] School of Mechanical and Electrical Engineering, Hunan University of Science and Technology, Xiangtan
[2] School of Marine Equipment and Mechanical Engineering, Jimei University, Xiamen
[3] Jianglu Electromechanical Group Co., Ltd., Xiangtan
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2024年 / 34卷 / 06期
关键词：
7A62 aluminum alloy; cryogenic treatment; mechanical property; microstructure;
D O I：
10.11817/j.ysxb.1004.0609.2023-44634
中图分类号：
学科分类号：
摘要：
The effects of T6 treatment, cryogenic DCT5h-T6 treatment before aging and cryogenic T6-DCT5h treatment after aging on the microstructure and mechanical properties of 7A62 Al alloy were systematically compared by means of XRD, SEM, TEM, hardness test and tensile test. The results show that the precipitated phase size of DCT5h-T6 alloy decreases, while the number density and dislocation density increase after cryogenic treatment, which result in the improvement of strength and elongation of compared with T6 treatment. Compared with the DCT5h-T6 treatment, the cryogenic treatment after aging further promotes the nucleation of the precipitated phase, the numerical density of the precipitated phase increases by 5%, besides, the precipitates have been refined and the distribution is more uniform, so that the T6-DCT5h alloy obtains the higher comprehensive mechanical properties, and its yield strength, tensile strength and elongation reach to 584 MPa, 637 MPa and 10.7%, respectively, which are higher than conventional T6 treatment by 28 MPa, 10 MPa and 37%, respectively. © 2024 Central South University of Technology. All rights reserved.
引用
收藏
页码：2008 / 2018
页数：10
相关论文
共 34 条
  • [1] LANG Y J, ZHOU G X, WANG S, Et al., Composition design and trans-scale precipitates strengthening of high-strength weldable 7A62 Al-alloy, The Chinese Journal of Nonferrous Metals, 30, 1, (2020)
  • [2] ZHOU G X, LANG Y J, DU Z X, Et al., Dynamic mechanical response and weldability of high strength 7A62 aluminum alloy, Journal of Physics: Conference Series, 1507, 3, (2020)
  • [3] ZHOU G X, LANG Y J, DU X Z, Et al., Dynamic mechanical response and J-C constitutive equation of high strength 7A62 aluminum alloy, The Chinese Journal of Nonferrous Metals, 31, 1, (2021)
  • [4] LIU X Z, GU K X, WENG Z J, Et al., A review on deep cryogenic treatment of aluminum alloy, Materials Reports, 34, 3, (2020)
  • [5] DENG Y L, ZHANG X M., Development of aluminum and aluminum alloy, The Chinese Journal of Nonferrous Metals, 29, 9, (2019)
  • [6] 28, 3, (2018)
  • [7] SONG Y B, LI L, LU J M, Et al., Research status and perspective of 7xxx series aluminum alloys welding, The Chinese Journal of Nonferrous Metals, 28, 3, (2018)
  • [8] CHEN D, DONG J F, MA G Z, Et al., The research about cryogenic treatment process of nonferrous alloys—A review, Materials Reports, 24, 21, (2010)
  • [9] YAO E Z, ZHANG H J, MA K, Et al., Effect of deep cryogenic treatment on microstructures and performances of aluminum alloys: a review, Journal of Materials Research and Technology, 26, pp. 3661-3675, (2023)
  • [10] LI M J, LIU G L, JIANG W H, Et al., Effect of cryogenic+ solidsolution+ageing composite treatment on microstructure and mechanical properties of A356 alloy, Chinese Journal of Rare Metals, 44, 1, (2020)
1234