Mechanical and autogenous shrinkage properties of coarse aggregate ultra-high performance concrete (CA-UHPC): The effect of mineral admixtures

To reduce the shrinkage and explore the best content of mineral admixtures of coarse aggregate ultra-high performance concrete (CA-UHPC), this study conducted 12 groups of autogenous shrinkage, basic material properties (compressive strength, tensile strength, and flowability), and X-ray diffraction experiments on CA-UHPC with coarse aggregate and different amounts of mineral admixtures (slag powder, limestone powder). The effects of coarse aggregate and mineral admixtures on the autogenous shrinkage and basic material properties of CA-UHPC were analyzed, and the measured values of CA-UHPC autogenous shrinkage strain were compared with the theoretical values calculated by six commonly used concrete shrinkage prediction models. The experimental results show that under the condition of 15 % coarse aggregate content and no steam curing, a CA-UHPC with a compressive strength greater than 110 MPa, a tensile strength greater than 11 MPa, a flowability greater than 290 mm, and an autogenous shrinkage of less than 700 after 120d can be obtained. The mineral admixture has a significant impact on the fundamental properties of CA-UHPC. The compressive strength, tensile strength, and flowability of CAUHPC with 15 % limestone powder and 15 % S95 slag powder increased by 6.6 %, 5.4 %, and 27.6 % compared to UHPC with only coarse aggregate added, and the autogenous shrinkage after 120 days decreased by 10.5 %. However, when the dosage of limestone powder and S95 slag powder exceeds 30 %, the tensile and compressive strength of CA-UHPC will rapidly decrease. This study also revised the GL 2000 shrinkage prediction model based on the CA-UHPC autogenous shrinkage test results, introduced the influence coefficient of mineral admixture content on autogenous shrinkage strain, and established a theoretical calculation model suitable for CAUHPC autogenous shrinkage strain.