Preparation and Fused Deposition Modeling of Multiwalled Carbon Nanotubes/Ionic Liquid/Poly (vinylidene fluoride) Dielectric Materials with High β Phase

被引：0
|
作者：
Shao J. [1 ]
Zhang H. [1 ]
Ke F. [1 ]
Wang C. [1 ]
Xu J. [1 ]
Chen Y. [1 ]
Wang H. [1 ]
机构：
[1] Key Laboratory of Ministry of Education for High Performance Fibers and Products, State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai
来源：
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2021年 / 37卷 / 09期
关键词：
Fused deposition modeling; Ionic liquid; Multiwalled carbon nanotubes; Polyvinylidene fluoride; Process parameters; Β; phase;
D O I：
10.16865/j.cnki.1000-7555.2021.0226
中图分类号：
学科分类号：
摘要：
Multiwalled carbon nanotubes (MWCNT)/ionic liquid (IL)/ polyvinylidene fluoride (PVDF)/ composites were prepared by adding IL-MWCNT. The results show that the conjugated interaction of IL-MWCNT with polymer effectively promotes the formation of polar β phase in PVDF, and the content of β phase in the composite is up to 76.8 %, which is 2.62 times of that in pure PVDF; the dielectric constant is 26.55 (100 Hz), 355% higher than that of pure PVDF. In addition, the optimal process parameters of fused deposition modeling(FDM) printing for PVDF composites were also discussed, which has guiding significance for the designable preparation of high dielectric devices by FDM printing. © 2021, Editorial Board of Polymer Materials Science & Engineering. All right reserved.
引用
收藏
页码：116 / 123
页数：7
相关论文
共 15 条
  • [1] Nadgorny M, Ameli A., Functional polymers and nanocomposites for 3D printing of smart structures and devices, ACS Applied Materials & Interfaces, 10, pp. 17489-17507, (2018)
  • [2] Mousavi S, Howard D, Zhang F, Et al., Direct 3D printing of highly anisotropic, flexible, constriction-resistive sensors for multidirectional proprioception in soft robots, ACS Applied Materials & Interfaces, 12, pp. 15631-15643, (2020)
  • [3] Zhou L Y, Fu J, He Y., A review of 3D printing technologies for soft polymer materials, Advanced Functional Materials, 30, (2020)
  • [4] Jin L, Zheng Y, Liu Z, Et al., Design of an ultrasensitive flexible bend sensor using a silver-doped oriented poly(vinylidene fluoride) nanofiber web for respiratory monitoring, ACS Applied Materials & Interfaces, 12, pp. 1359-1367, (2020)
  • [5] Yuan X, Gao X, Yang J, Et al., The large piezoelectricity and high power density of a 3D-printed multilayer copolymer in a rugby ball-structured mechanical energy harvester, Energy & Environmental Science, 13, pp. 152-161, (2020)
  • [6] Martins P, Lopes A C, Lanceros M S., Electroactive phases of poly(vinylidene fluoride): determination, processing and applications, Progress in Polymer Science, 39, pp. 683-706, (2014)
  • [7] Shepelin N A, Glushenkov A M, Lussini V C, Et al., New developments in composites, copolymer technologies and processing techniques for flexible fluoropolymer piezoelectric generators for efficient energy harvesting, Energy & Environmental Science, 12, pp. 1143-1176, (2019)
  • [8] Xing C, Zhao L, You J, Et al., Impact of ionic liquid-modified multiwalled carbon nanotubes on the crystallization behavior of poly(vinylidene fluoride), The Journal of Physical Chemistry B, 116, pp. 8312-8320, (2012)
  • [9] Yang J H, Xiao Y J, Yang C J, Et al., Multifunctional poly (vinylidene fluoride) nanocomposites via incorporation of ionic liquid coated carbon nanotubes, European Polymer Journal, 98, pp. 375-383, (2018)
  • [10] Li Y, Shi Y, Cai F, Et al., Graphene sheets segregated by barium titanate for polyvinylidene fluoride composites with high dielectric constant and ultralow loss tangent, Composites Part A: Applied Science and Manufacturing, 78, pp. 318-326, (2015)
12