Measurement of Residual Stress Based on a Ring FBG Array

被引：0
|
作者：
Zhang, Jianzhong [1 ]
Tan, Tao [1 ]
Duan, Chao [1 ]
Li, Zhuoshu [1 ]
Liu, Xianghe [1 ]
Chai, Quan [1 ]
Xiao, Gui [1 ]
Tian, Ye [1 ]
Zhang, Weibin [2 ]
Xu, Yao [3 ,4 ]
机构：
[1] Key Laboratory of In-Fiber Integrated Optics, Ministry of Education, Harbin Engineering University, Harbin,150001, China
[2] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing,100081, China
[3] Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang,621999, China
[4] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing,100081, China
来源：
IEEE Transactions on Instrumentation and Measurement | 2022年 / 71卷
关键词：
Residual stresses;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Based on the hole-drilling strain sensing method, a ring fiber Bragg grating (FBG) array is proposed to realize comprehensive and convenient measurement of residual stress for homogeneous or inhomogeneous materials. All FBG sensors are arranged tangentially along the edge of the ring. With the ring array around the drilled hole, more detailed information of the residual stress can be obtained such as the location and the degree of inhomogeneity. The tangential arrangement of FBG sensors can achieve comparable measurement results with the radial arrangement but it brings convenience for the drilling process without any overlap upon the hole position. This method promotes the application of the FBG sensors in the residual stress measurement field. © 1963-2012 IEEE.
引用
收藏
相关论文
共 50 条
  • [1] Measurement of Residual Stress Based on a Ring FBG Array
    Zhang, Jianzhong
    Tan, Tao
    Duan, Chao
    Li, Zhuoshu
    Liu, Xianghe
    Chai, Quan
    Xiao, Gui
    Tian, Ye
    Zhang, Weibin
    Xu, Yao
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2022, 71
  • [2] Accuracy Improvement of Residual Stress Measurement by Chirp Compensation of FBG
    Xu, Yao
    Duan, Chao
    Li, Zhuoshu
    Tan, Tao
    Qiu, Chengjun
    Xiao, Gui
    Tian, Ye
    Zhang, Weibin
    Zhang, Jianzhong
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2021, 70
  • [3] Residual stress measurement and prediction in a hardened steel ring
    Prime, MB
    Prantil, VC
    Rangaswamy, P
    García, FP
    ECRS 5: PROCEEDINGS OF THE FIFTH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2000, 347-3 : 223 - 228
  • [4] Residual stress measurement and prediction in a hardened steel ring
    Prime, M.B.
    Prantil, V.C.
    Rangaswamy, P.
    García, F.P.
    Materials Science Forum, 2000, 347 : 223 - 228
  • [5] Ring Patch Sensor based on FBG Array for Normal and Bending Load Recognition
    Ameduri, Salvatore
    Bettini, Paolo
    Ciminello, Monica
    Concilio, Antonio
    2017 IEEE SENSORS, 2017, : 765 - 767
  • [6] RESIDUAL STRESS MEASUREMENT USING RING-CORE METHOD
    Holy, Stanislav
    Bohdan, Petr
    Jankovec, Jiri
    Jaros, Petr
    Vaclavik, Jaroslav
    Weinberg, Otakar
    25TH DANUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS, 2008, : 89 - 90
  • [7] Measurement of Residual Stress by Cutting Method in Cold Ring Rolling
    Zuo, Z. J.
    Fu, L. R.
    Li, Y.
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 329 - 333
  • [8] X Ray Measurement for Residual Stress in Cold Ring Rolling
    Zuo, Zhijiang
    Yu, Wuxin
    Yang, Junjie
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 1647 - 1650
  • [9] Residual stress measurement of gold artefacts by Debye ring analysis
    Zanola, P.
    Benedetti, D.
    Bontempi, E.
    Villa, V.
    Baronio, G.
    Tosti, M.
    Roberti, R.
    Depero, L. E.
    ZEITSCHRIFT FUR KRISTALLOGRAPHIE, 2006, : 61 - 66
  • [10] Integral Equation Method for Ring-Core Residual Stress Measurement
    Civin, Adam
    Vlk, Milos
    Navratil, Petr
    EXPERIMENTALNI ANALYZA NAPETI - EXPERIMENTAL STRESS ANALYSIS, 2011, : 31 - 38
12345