Temperature effect of new-type composite box girder with corrugated steel webs

被引:1
|
作者
Wang L. [1 ]
Liu S.-Z. [1 ]
Lu W. [1 ,2 ]
Niu S.-S. [3 ]
Shi X.-L. [1 ]
机构
[1] School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou
[2] School of Civil Engineering, Northwest Minzu University, Lanzhou
[3] Gansu Provincial Department of Transportation, Lanzhou
关键词
Composite box girder; Corrugated steel web; Shear deformation; Slip effect; Temperature effect; Temperature field;
D O I
10.3785/j.issn.1008-973X.2021.04.009
中图分类号
学科分类号
摘要
The temperature effect of new-type composite box girder with corrugated steel webs (CSWs) is prominent due to the significant difference of thermal parameters between concrete and steel. A theoretical calculation method for relative slip, internal force and stress of new composite box girder with CSWs under vertical temperature gradient was established. The equilibrium condition of sub-girder, deformation coordination condition between sub-girders and shear deformation effect of CSWs were considered. The temperature of new composite box test beam with CSWs in large temperature difference area was observed for a long time, and the vertical temperature gradient function of the structure was fitted. The temperature response of the structure under the measured temperature gradient was calculated by the theoretical method, and the theory was verified by finite element simulation. Results show that the interfacial shear force, the bending moment and the stress of the beam are all distributed as hyperbolic cosine function along the longitudinal direction of the beam under the measured temperature gradient. The relative slip between layers is distributed as hyperbolic sine function along the longitudinal direction of the beam. Whether the shear deformation effect of webs is considered greatly influences on the temperature effect in the range of 0.8 m from the end to the middle of the composite beam, and the effect on the middle of the composite beam can be ignored. The linear expansion coefficient of concrete, the sliding stiffness between layers and the interface temperature difference of composite box girder greatly influence on the temperature effect of the new composite box girder with CSWs. The interlayer shear connectors should be reasonably arranged in the design, and the temperature effect of the new composite box girder with CSWs should be calculated by considering the variation of the linear expansion coefficient of concrete. Copyright ©2021 Journal of Zhejiang University (Engineering Science). All rights reserved.
引用
收藏
页码:675 / 683
页数:8
相关论文
共 21 条
  • [1] NIE Jian-guo, ZHU Ying-jie, TAO Mu-xuan, Et al., Optimized prestressed continuous composite girder bridges with corrugated steel webs, Journal of Bridge Engineering, 22, 2, pp. 1-17, (2017)
  • [2] LI Hong-jiang, Review on special issues in prestressed concrete box girders with corrugated steel webs, Journal of Basic Science and Engineering, 26, 2, pp. 440-454, (2018)
  • [3] LIU Yong-jian, LIU Jiang, ZHANG Ning, Et al., Analytical solution of temperature effects of steel-concrete composite girder, Journal of Traffic and Transportation Engineering, 17, 4, pp. 9-19, (2017)
  • [4] AASHTO-LRFD bridge design specifications: AASHTO LRFDUS-2017, (2017)
  • [5] Steel, concrete and composite bridges—Part2: specification for loads, BS 5400-2: 2006, (2006)
  • [6] Eurocode1: actions on structures—Part 1-5: general actions—thermal actions, (2003)
  • [7] (2015)
  • [8] CHEN Yan-jiang, WANG Li-bo, LI Yong, Research of temperature field and its effect of steel-concrete composite girder bridge, Journal of Highway and Transportation Research and Development, 31, 11, pp. 85-91, (2014)
  • [9] JI De-jun, LIU Jiang, ZHANG Zhuan-fang, Et al., Temperature effect analysis of steel-concrete composite girder cable-stayed bridge in arctic-alpine region, Journal of Architecture and Civil Engineering, 33, 1, pp. 113-119, (2016)
  • [10] XIAO Xin-hui, LIU Yang, GUO Xin, Et al., Observation and study of temperature distribution in combination of high pier large span continuous and rigid frame bridge, Journal of Railway Science and Engineering, 11, 1, pp. 10-16, (2014)