3D imaging method based on scanning rotation synchronous motion

被引:0
|
作者
Zhao J. [1 ]
Lou C. [1 ]
Miao J. [1 ]
Xuan S. [1 ]
机构
[1] School of Electronic Information Engineering, Beihang University, Beijing
关键词
azimuth rotation; electromagnetic scattering measurement; stealth aircraft; three-dimensional imaging; vertical scanning;
D O I
10.13700/j.bh.1001-5965.2022.0266
中图分类号
学科分类号
摘要
In order to meet the requirements of rapid detection of stealth performance of in-service fighters, a scattering measurement method based on vertical scanning and azimuth rotation synchronous motion is proposed. The vertical guide rail, turntable, data processing terminal, RF transceiver equipment, and transceiver antenna pair make up the majority of the measuring system. When the antenna transmits the frequency step signal, it horizontally rotates the target to be measured on the turntable. At the same time, the transceiver antenna pair scans the target to be measured in the vertical direction. Taking the combination of point targets as an example, the parameter configuration of the measurement system is determined through theoretical analysis and simulation calculation, and the three-dimensional imaging performance of the system under different parameter configurations is compared. The simulation results show that the scattering measurement method of vertical scanning and azimuth rotation synchronous motion can realize three-dimensional imaging. When compared to the traditional cylindrical scanning approach, there is a 92% reduction in measurement time while maintaining the peak sidelobe ratio of 12 dB. The measurement method has the characteristics of high test efficiency, simple system construction and easy adjustment. It provides an effective measurement method for the scattering source diagnosis of stealth aircraft in service. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码:796 / 802
页数:6
相关论文
共 20 条
  • [1] RUAN Y Z., Radar cross section and stealth technology, (1998)
  • [2] ZENG T X, ZHANG B Z., Challenges and development prospects of military aircraft maintenance, Aviation Maintenance & Engineering, 1, pp. 28-31, (2005)
  • [3] ZHANG P, CHE L L, MA Y L, Et al., Foreign RCS near-field measurement technology for stealth aircraft, Aircraft Design, 39, 4, pp. 15-19, (2019)
  • [4] TICE T E., An overview of radar cross section measurement techniques, IEEE Transactions on Instrumentation and Measurement, 39, 1, pp. 205-207, (1990)
  • [5] CHEN Q, WEI W, XIAO B, Et al., Research status of outdoor RCS measurement range for weapon and equipment abroad, Surface Technology, 41, 5, pp. 129-132, (2012)
  • [6] ZHANG F S, JIAO Y C, MA J P, Et al., The state of the art of near field techniques for radiation, targets scattering measurements and object imaging, Journal of Xidian University, 26, 5, pp. 651-656, (1999)
  • [7] CAO C Q, ZENG X D, FAN Z J, Et al., Measurement and analysis of aircraft and vehicle LRCS in outfield test, Proceedings of the Photoelectronic Technology, 9522, pp. 472-475, (2015)
  • [8] SONG Y Q, HONG T, YAO J, Et al., Three-dimensional imaging down sampling quick scanning method based on plane scanning structure
  • [9] XING S G, LV X D, DING C B., Research on radar cross section measurement based on near-field imaging of cylindrical scanning, Journal of Radars, 4, 2, pp. 172-177, (2015)
  • [10] LYU X D, XING S G, DING C B, Et al., Backscatter cross section measurement method based on cylinder scanning three-dimensional near-field imaging