Research on Cavitation Flow Dynamics and Entropy Generation Analysis in an Axial Flow Pump

被引:0
|
作者
Shen, Simin [1 ,2 ,3 ]
Huang, Bensheng [1 ]
Huang, Si [3 ]
Xu, Shun [4 ]
Liu, Shufeng [1 ]
机构
[1] Guangdong Research Institute of Water Resources and Hydropower, Guangzhou,510610, China
[2] School of Water Resources and Hydropower Engineering, Wuhan University, Wuhan,430072, China
[3] School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou,510641, China
[4] School of Aerospace Engineering, Huazhong University of Science and Technology, Wuhan,430074, China
基金
中国国家自然科学基金;
关键词
Axial flow - Energy dissipation - Entropy - Impellers - Kinetic energy - Kinetics - Pumps - Vortex flow;
D O I
暂无
中图分类号
学科分类号
摘要
The entropy generation theory is introduced to investigate the effects of different NPSH and tip clearance size on the cavitation flow dynamics and mechanical energy dissipation intuitively and quantitatively within an axial flow pump through numerical simulations. The results indicate that main mechanical energy dissipation of the pump gathers in part impeller and diffuser, and most are turbulent dissipation. Meanwhile, the impeller is the largest place of mechanical energy dissipation of the pump under cavitation conditions, accounting for more than 50%. NPSH has significant effects on the cavitation pattern, which reflects on the field that the areas of attached sheet cavitation and tip leakage vortex cavitation around blades increase obviously with NPSH reducing under the tip clearance of 0.1% span. With NPSH decreasing, high regions of turbulent dissipation in the impeller mainly expands along blades and move downstream, with span S0.98 near the shroud having larger turbulent dissipation. Besides, high regions of turbulent dissipation are mainly distributed at the rear part of the cavity for every corresponding span of the impeller, which indicates that the turbulent dissipation has a strong relation with the cavitation pattern. In the impeller, the unstable flows cause cavity shedding at the rear of the cavity and wake flows near the blade trail induce higher turbulent kinetic energy, finally resulting in higher turbulent dissipation there. Under the same NPSH, areas of tip leakage vortex cavitation and areas of tip clearance cavitation around the tip both expand with the tip clearance increasing from 0.1% span to 0.8% span. And high areas of turbulent dissipation also are distributed at the rear of the cavity and moving downstream along the blade suction side, especially at span S0.98. Therefore, the tip clearance width mainly affects the cavitation development and turbulent dissipation distribution near the impeller's shroud under same NPSH. © 2022 Simin Shen et al.
引用
收藏
相关论文
共 50 条
  • [1] Research on Cavitation Flow Dynamics and Entropy Generation Analysis in an Axial Flow Pump
    Shen, Simin
    Huang, Bensheng
    Huang, Si
    Xu, Shun
    Liu, Shufeng
    JOURNAL OF SENSORS, 2022, 2022
  • [2] Research on Cavitation Flow Dynamics and Entropy Generation Analysis in an Axial Flow Pump
    Shen, Simin
    Huang, Bensheng
    Huang, Si
    Xu, Shun
    Liu, Shufeng
    JOURNAL OF SENSORS, 2022, 2022
  • [3] Research on Cavitation Flow Dynamics and Entropy Generation Analysis in an Axial Flow Pump
    Shen, Simin
    Huang, Bensheng
    Huang, Si
    Xu, Shun
    Liu, Shufeng
    JOURNAL OF SENSORS, 2022, 2022
  • [4] Local Entropy Generation Analysis for Cavitation Flow Within a Centrifugal Pump
    Lai, Fen
    Huang, Maoli
    Wu, Xiaofei
    Nie, Changhua
    Li, Guojun
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2022, 144 (10):
  • [5] Numerical analysis of vortex and cavitation dynamics of an axial-flow pump
    Gong, Jie
    Luo, Wan-zhen
    Wu, Tie-cheng
    Zhang, Zhi-yuan
    ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2022, 16 (01) : 1921 - 1938
  • [6] Analysis of cavitation performances of an axial flow tandem pump based on computational fluid dynamics
    Zhao, Yu
    Wang, Guoyu
    Wu, Qin
    Yu, Qidong
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2014, 50 (06): : 171 - 176
  • [7] Study on the Influence of Tip Clearance on Cavitation Performance and Entropy Production of an Axial Flow Pump
    Yu, Lei
    Cheng, Li
    Xu, Wentao
    Lei, Shuaihao
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2024, 12 (01)
  • [8] A study on tip leakage vortex dynamics and cavitation in axial-flow pump
    Shi, Lei
    Zhang, Desheng
    Jin, Yongxin
    Shi, Weidong
    van Esch, B. P. M.
    FLUID DYNAMICS RESEARCH, 2017, 49 (03)
  • [9] Study on cavitation influence for pump head in an axial flow pump
    Hosono, K.
    Kajie, Y.
    Saito, S.
    Miyagawa, K.
    9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015), 2015, 656
  • [10] Numerical analysis of cavitation within slanted axial-flow pump
    Rui Zhang
    Hong-xun Chen
    Journal of Hydrodynamics, 2013, 25 : 663 - 672