Nonlinear analysis of load transfer of grouting branch-type anchor

被引：0
|
作者：
Yang J. [1 ]
Jian W.-B. [1 ,2 ]
Huang W. [1 ]
Huang C.-H. [1 ]
Luo J.-M. [3 ]
Li X.-Z. [3 ]
机构：
[1] Institute of Geotechnical and Geological Engineering, College of Environment and Resources, Fuzhou University, Fuzhou
[2] Key Laboratory of Geohazard Prevention of Fujian Province, Fuzhou University, Fuzhou
[3] Fujian Geological Exploration Institute of Geology and Mine Bureau, Fuzhou
来源：
Jian, Wen-Bin (jwb@fzu.edu.cn); Jian, Wen-Bin (jwb@fzu.edu.cn) | 1896年 / Chinese Society of Civil Engineering卷 / 43期
关键词：
Branch-type anchor; Cavity theory expansion; Load transfer; Nonlinearity; Numerical calculation;
D O I：
10.11779/CJGE202110016
中图分类号：
学科分类号：
摘要：
Based on the indoor model pull-out tests on the branch-type anchor, the variation characteristics of the load-displacement curve and the axial force transmission characteristics are studied. Then, the mechanical model for the anchor is discussed, and the theoretical formula for the end resistance of disc is derived. Combined with the hyperbolic nonlinear model for the anchor-soil interface, the load transfer model is established by using the sectional deformation coordinated iterative algorithm. Finally, the sensitivity analysis of the parameters such as the ultimate pressure of cavity expansion distribution and the squeezing angle of the branch disc is performed. The results show that the load displacement curve can be divided into three stages. The axial force distribution decreases along the anchor depth and the step mutation occurs at the branch disc, and the load ratio also increases continuously. The calculated results are basically consistent with the indoor measured data, which verifies the validity of the model. The ultimate pressure of cavity expansion increases rapidly and nonlinearly along the radial direction of the branch disc and then decreases slowly. The peak value increases with the displacement and moves radially outward with the center of the branch disc as the circular point. The overall distribution changes from "cone platform" to "cylinder". When the squeezing angle is greater than 50°, the ultimate drawing force significantly increases. The research results are of important theoretical and practical significance for the analysis and design of the force of the branch-type anchor. © 2021, Editorial Office of Chinese Journal of Geotechnical Engineering. All right reserved.
引用
收藏
页码：1896 / 1904
页数：8
相关论文
共 26 条
  • [1] CHENG Liang-kui, ZHANG Pei-wen, WANG Fang, Several mechanical concepts for anchored structures in rock and soil, Chinese Journal of Rock Mechanics and Engineering, 34, 4, pp. 668-682, (2015)
  • [2] JIAN Wen-bin, HUANG Wei, LUO Jin-mei, Et al., Multi-branch Anchor Structure
  • [3] JIAN Wen-bin, YANG Jian, LUO Jin-mei, Et al., Hole Reaming Equipment and Construction Method of Multi-Branch Anchor Solid System
  • [4] YANG Jian, JIAN Wen-bin, HUANG Wei, Et al., Pull-out test and ultimate bearing capacity calculation of grouting branch-type anchor, Rock and Soil Mechanics, 42, 4, pp. 1126-1132, (2021)
  • [5] NIE W, ZHAO Z Y, NING Y J, Et al., Numerical studies on rockbolts mechanism using 2D discontinuous deformation analysis, Tunnelling and Underground Space Technology, 41, 1, pp. 223-233, (2014)
  • [6] MA S Q, NEMCIK J, AZIZ N., An analytical model of fully grouted rock bolts subjected to tensile load, Construction and Building Materials, 49, 8, pp. 519-526, (2013)
  • [7] NEMCIK J, MA S, AZIZ N, Et al., Numerical modelling of failure propagation in fully grouted rock bolts subjected to tensile load, International Journal of Rock Mechanics and Mining Sciences, 71, 10, pp. 293-300, (2014)
  • [8] MA S Q, ZHAO Z Y, NIE W, Et al., An analytical model for fully grouted rockbolts with consideration of the pre-and post-yielding behavior, Rock Mechanics and Rock Engineering, 50, 11, pp. 3019-3028, (2017)
  • [9] NI P, SONG L, MEI G, Et al., Generalized nonlinear softening load-transfer model for axially loaded piles, International Journal of Geomechanics, 17, 8, (2017)
  • [10] BRYSON L S, GIRALDO J R., Analysis of case study presenting ground anchor load-transfer response in shale stratum, Canadian Geotechnical Journal, 57, 1, pp. 85-99, (2020)
123