Anomalous dielectric behavior of poled K0.5Bi0.5TiO3 ceramics

被引:3
|
作者
Badole M. [1 ]
Dwivedi S. [1 ]
Kumar S. [1 ]
机构
[1] Department of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Simrol
关键词
Dielectric properties; Perovskites; Sintering; X-ray method;
D O I
10.1016/j.ceramint.2021.12.336
中图分类号
学科分类号
摘要
Perovskite K0.5Bi0.5TiO3 (KBT) ceramics were prepared via the solid-state synthesis method and the structural, dielectric, and piezoelectric properties in unpoled & poled states were analyzed to resolve the reported discrepancies in this material. The Rietveld refinement of room-temperature x-ray diffraction data of the unpoled KBT shows the coexistence of tetragonal (P4mm) & cubic (Pm3‾m) phases. However, two tetragonal phases (P4mm) with different c/a ratios were suggested in poled KBT, signifying the external electric field effect on structural transformation. These structural changes were further corroborated by the appearance of an additional anomaly in the temperature-dependent dielectric permittivity of poled KBT ceramic. The possible mechanisms responsible for electric field-dependent phase transformation and anomalous dielectric behavior of KBT ceramics are discussed. The temperatures of normal to relaxor ferroelectric transition (TF-R) and depolarization (Td) were estimated to be ∼280 °C and 320 °C, respectively. The higher value of Td than TF-R implies the nonergodic relaxor state in KBT ceramic. Dielectric and piezoelectric measurements performed on relaxor ferroelectric BiAlO3 modified KBT ceramics further strengthen the proposed mechanisms responsible for anomalous dielectric behavior in poled KBT ceramics. © 2021 Elsevier Ltd and Techna Group S.r.l.
引用
收藏
页码:11166 / 11172
页数:6
相关论文
共 50 条
  • [1] Structural, thermal, dielectric and ferroelectric properties of K0.5Bi0.5TiO3 ceramics
    Suchanicz, J.
    Kania, A.
    Czaja, P.
    Budziak, A.
    Niewiadomski, A.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (02) : 567 - 574
  • [2] Improved dielectric and relaxor behavior in LaScO3-doped K0.5Bi0.5TiO3 ceramics
    Manish Badole
    Sushmita Dwivedi
    Hari Narayanan Vasavan
    Samriddhi Saxena
    Velaga Srihari
    Sunil Kumar
    Journal of Materials Science: Materials in Electronics, 2022, 33 : 25661 - 25673
  • [3] The thermal decomposition of K0.5Bi0.5TiO3 ceramics
    Konig, J.
    Spreitzer, M.
    Jancar, B.
    Suvorov, D.
    Samardzija, Z.
    Popovic, A.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (09) : 1695 - 1701
  • [4] Improved dielectric and relaxor behavior in LaScO3-doped K0.5Bi0.5TiO3 ceramics
    Badole, Manish
    Dwivedi, Sushmita
    Vasavan, Hari Narayanan
    Saxena, Samriddhi
    Srihari, Velaga
    Kumar, Sunil
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2022, 33 (34) : 25661 - 25673
  • [5] The Influence of Technological Conditions on Dielectric and Optical Properties of K0.5Bi0.5TiO3 Ceramics
    Czaja, P.
    Suchanicz, J.
    Piasecki, M.
    Kluczewska, K.
    Hudy, W.
    FERROELECTRICS, 2019, 538 (01) : 91 - 95
  • [6] Effects of K0.5Bi0.5TiO3 addition on dielectric properties of BaTiO3 ceramics
    Yuan, Qibin
    Pu, Yongping
    CERAMICS INTERNATIONAL, 2013, 39 (04) : 3507 - 3510
  • [7] Influence of PbTiO3 doping on semiconductor behavior of K0.5Bi0.5TiO3 ceramics
    Karpierz, M.
    Suchanicz, J.
    Konieczny, K.
    Kluczewska, K.
    PHASE TRANSITIONS, 2017, 90 (09) : 840 - 846
  • [8] Synthesis and Characteristics of K0.5Bi0.5TiO3 Ceramics with Addition of CuO
    Zhang, Hong-Qi
    Tong, Fei
    Yi, Li-Hu
    Liu, Yu
    MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (10) : 1168 - 1171
  • [9] Electrical properties of K0.5Bi0.5TiO3
    Rao, P. Vijaya Bhaskar
    Ramana, E. V.
    Sankaram, T. Bhima
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 467 (1-2) : 293 - 298
  • [10] Synthesis of K0.5Bi0.5TiO3 nanowires and ceramics by a simple hydrothermal method
    Jiang, Xiang-Ping
    Lin, Mei
    Tu, Na
    Chen, Chao
    Li, Yue-Ming
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2010, 175 (01): : 90 - 93