Supported LaCoO3 perovskite-like oxides for N2O decomposition: The key role of the support nature and LaCoO3 content

In this work a detailed comparison of the N2O decomposition catalytic performance of LaCoO3 perovskite-like mixed oxides supported over different commercial materials was conducted. Zirconia-, silica- and gamma-alumina-based supports were studied. Zirconia-based supports turned out to be the most applicable because of the formation of the pure LaCoO3 perovskite phase on their surface. Among these supports, ZrO2-La revealed to possess the best activity owing to the highest Co2+/Co3+ (0.82) and O-ads./O-L (0.67) ratios on its surface. The raw of activities was as follows: LaCoO3(20 %)/ZrO2-La > LaCoO3(20 %)/ZrO2 > LaCoO3((2)0 %)/ZrO2-W. When the LaCoO3 content in LaCoO3/ZrO2-La was 20 wt%, the maximum of activity was observed - 94.78 mmol(N2O)/[g(cat.)<middle dot>h] at 450 degrees C. This fact was in accordance with the highest Co2+/Co3+ (0.82) and O-ads./O-L (0.67) ratios at the 20 wt% LaCoO3 content. Coordinatively unsaturated Co2+, forming Lewis acid-base pairs, were proposed to be the active sites of the zirconia-based LaCoO3 catalysts in the N2O decomposition.