Prediction of fatigue crack propagation based on auxiliary particle filtering

被引：0

作者：

Yang W. ^{[1
]}

Yuan S. ^{[1
]}

Qiu L. ^{[1
]}

Chen J. ^{[1
]}

机构：

[1] State Key Lab of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing

来源：

Yuan, Shenfang | 2018年 / Chinese Vibration Engineering Society卷 / 37期

关键词：

Auxiliary particle filtering; Fatigue crack propagation; Lamb wave; Particle filtering; Structural health monitoring;

D O I：

10.13465/j.cnki.jvs.2018.05.017

中图分类号：

学科分类号：

摘要：

Aiming at the lack of diversity in the particle filtering algorithm for fatigue crack life prediction, a method for prediction of fatigue crack propagation based on auxiliary particle filtering and structural health monitoring was proposed. Firstly, Paris rule of crack propagation was combined with the finite element method to build the state equation of crack propagation. Secondly, the active Lamb wave health monitoring technique was used to monitor the process of fatigue crack propagation. The time delay damage index was used to process Lamb wave signals, and then fit the function relation between crack length and damage index, the observation equation of crack propagation was established. The state space model for crack propagation was built through combining state equations and observation equations. Finally, the life prediction of hole-edge crack propagation was realized using the auxiliary particle filtering and the standard particle filtering, respectively. The comparison of the prediction results showed that the auxiliary particle filtering in fatigue crack propagation prediction of complex structures can effectively mitigate the lack of particle diversity combining the latest observation; its prediction results are more accurate; it is more applicable for realizing complex structures' online fatigue life prediction. © 2018, Editorial Office of Journal of Vibration and Shock. All right reserved.

引用

页码：114 / 119and125

共 19 条

[1] Zhang H., Kang R., Pecht M., A hybrid prognostics and health management approach for condition-based maintenance, 2009 IEEE International Conference on Industrial Engineering and Engineering Management, (2009)
[2] Pecht M., Gu J., Physics-of-failure-based prognostics for electronic products, Transactions of the Institute of Measurement and Control, 31, 3-4, pp. 309-322, (2009)
[3] Sheppard J.W., Kaufman M.A., Wilmer T.J., IEEE standards for prognostics and health management, Aerospace and Electronic Systems Magazine, 24, 9, pp. 34-41, (2009)
[4] Gordon N.J., Salmond D.J., Smith A.F.M., Novel approach to nonlinear/non-Gaussian Bayesian state estimation, IEE Proceedings F (Radar and Signal Processing), 140, 2, pp. 107-113, (1993)
[5] Orchard M., Vachtsevanos G., A particle filtering approach for on-line failure prognosis in a planetary carrier plate, International Journal of Fuzzy Logic and Intelligent Systems, 7, 4, pp. 221-227, (2007)
[6] Orchard M.E., Vachtsevanos G.J., A particle-filtering approach for on-line fault diagnosis and failure prognosis, Transactions of the Institute of Measurement and Control, 31, 3-4, pp. 221-246, (2009)
[7] Cadini F., Zio E., Avram D., Monte Carlo-based filtering for fatigue crack growth estimation, Probabilistic Engineering Mechanics, 24, 3, pp. 367-373, (2009)
[8] Zio E., Paloni G., Particle filtering prognostic estimation of the remaining useful life of nonlinear components, Reliability Engineering & System Safety, 96, 3, pp. 403-409, (2011)
[9] Yuan S., Zhang H., Qiu L., Et al., A fatigue crack growth prediction method based on particle filter, Acta Aeronautica et Astronautic Sinica, 34, 12, pp. 2740-2747, (2013)
[10] Doucet A., Godsill S., Andrieu C., On sequential Monte Carlo sampling methods for Bayesian filtering, Statistics and Computing, 10, 3, pp. 197-208, (2000)

← 1 2 →