Flow Nonlinear Compensation Control for Electro-Hydraulic Servo Shaking Table

被引：3
|
作者：
Wei W. [1 ]
Liu X. [1 ]
Kong J. [1 ]
Huang W. [1 ]
Han J. [2 ]
机构：
[1] Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Chengdu, 610200, Sichuan
[2] School of Mechatronic Engineering, Harbin Institute of Technology, Harbin, 150001, Heilongjiang
来源：
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) | 2018年 / 46卷 / 09期
关键词：
Compensation control; Electro-hydraulic servo system; Flow nonlinearity; Shaking table;
D O I：
10.3969/j.issn.1000-565X.2018.09.004
中图分类号：
学科分类号：
摘要：
In order to reduce the distortion of acceleration vibration signal caused by the flow nonlinearity on electro-hydraulic servo shaking table, a control strategy based on the nonlinear compensation of flow is presented. Nonlinear flow equations of two valve cavities are built through the throttle equation. Combined with the hydraulic continuity equation and force balance equation, a nonlinear model of electro-hydraulic servo shaking table is established. According to the Taylor equation near the steady state point, the linear control model of the nonlinear hydraulic system is also given. Considering the maximum dynamic output force, a nonlinear compensation function related to the load pressure is introduced, which makes the flow of the compensated servo valve linearly with the spool displacement. The simulation and experimental results show that the nonlinear flow compensation control method can effectively reduce the acceleration distortion and improve the tracking accuracy of the vibration signal. © 2018, Editorial Department, Journal of South China University of Technology. All right reserved.
引用
收藏
页码：24 / 29and72
页数：2948
相关论文
共 17 条
  • [1] Ceresa P., Brezzi F., Calvi G.M., Et al., Analytical modeling of a large-scale dynamic testing facility, Earthquake Engineering and Structural Dynamics, 41, 2, pp. 255-277, (2012)
  • [2] Severn R.T., The development of shaking tables-a historical note, Earthquake Engineering and Structural Dynamics, 40, 2, pp. 195-213, (2011)
  • [3] Gao C., Ji J., Yan W., Et al., Developments of shaking table technology in China, China Civil Engineering Journal, 47, 8, pp. 9-19, (2014)
  • [4] Eunjong Y., Dnniel H., Joel P., Et al., Forced vibration testing of buildings using the linear shaker seismic simulation(LSSS)testing method, Earthquake Engineering and Structural Dynamics, 34, pp. 737-761, (2005)
  • [5] Paolo R., Roberto S., Shirin V., Et al., Nolinear model of a servo-hydraulic shaking table with dynamic model of effective bulk modulus, Mechanical Systems and Signal Processing, 110, pp. 248-259, (2018)
  • [6] Shen G., Zhu Z., Zhang L., Et al., Adaptive feed-forward compensation for hybrid control with accelera-tion time waveform replication on electro-hydraulic shaking table, Control Engineering Practice, 21, 8, pp. 1128-1142, (2013)
  • [7] Gao C.-H., Cong D.-C., Yang Z.-D., Et al., Internal force-coupling dynamic suppression strategy for redundantly-actuated hydraulic shaking table, Journal of South China University of Technology(Natural Science Edition), 44, 1, pp. 93-99, (2016)
  • [8] Tagawa Y., Kajiwara K., Controller development for the E-defense shaking table, Proceedings of the Institution of Mechanical Engineers.I: Journal of System and Control Engineering, 221, 2, pp. 171-181, (2007)
  • [9] Kakegawa T., Suzuki T., Sato E., Et al., Linear model derivation and three variable control (TVC) of the world largest 3-D full-scale shaking table, Transactions of the Japan Society of Mechanical Engineers, Part C, 69, 2, pp. 343-348, (2003)
  • [10] Cuyper J.D., Veraegen M., State space modeling and stable dynamic inversion for trajectory tracking on an industrial sat test rig, Journal of Vibration and Control, 8, 7, pp. 1033-1050, (2002)
12