A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation

被引：0

作者：

School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia ^{[1
]}

机构：

来源：

Key Eng Mat | 2009年 / 33-44期

关键词：

Jets;

D O I：

10.4028/3-908454-05-0.33

中图分类号：

学科分类号：

摘要：

引用

页码：33 / 44

共 50 条

[1] A study of abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation
S. Xu
J. Wang
The International Journal of Advanced Manufacturing Technology, 2006, 27 : 693 - 702
[2] A study of abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation
Xu, S
Wang, J
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (7-8): : 693 - 702
[3] ENHANCING THE DEPTH OF CUT IN ABRASIVE WATERJET CUTTING OF ALUMINA CERAMICS BY USING MULTIPASS CUTTING WITH NOZZLE OSCILLATION
Wang, J.
Zhong, Y.
MACHINING SCIENCE AND TECHNOLOGY, 2009, 13 (01) : 76 - 91
[4] Enhancing abrasive waterjet cutting of ceramics by head oscillation techniques
Queensland Univ of Technology, Brisbane
CIRP Ann Manuf Technol, 1 (327-330):
[5] Enhancing the AWJ cutting performance by multipass machining with controlled nozzle oscillation
Wang, J
Xu, S
ADVANCES IN ABRASIVE TECHNOLOGY VIII, 2005, 291-292 : 453 - 458
[6] Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics with nozzle oscillation
Wang J.
Frontiers of Mechanical Engineering in China, 2010, 5 (1): : 19 - 32
[7] Nozzle wear detection in abrasive waterjet cutting systems
Kovacevic, R., 1600, (48):
[8] NOZZLE WEAR DETECTION IN ABRASIVE WATERJET CUTTING SYSTEMS
KOVACEVIC, R
EVIZI, M
MATERIALS EVALUATION, 1990, 48 (03) : 348 - 353
[9] A study on nozzle wear modeling in Abrasive Waterjet Cutting
Vu Ngoc Pi
Nguyen Quoc Tuan
ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 345 - 350
[10] Enhancing the capability and performance of abrasive waterjet cutting technology by multipass operations
Wang, J
PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON FRONTIERS OF DESIGN AND MANUFACTURING, VOL 1, 2002, : 270 - 278

← 1 2 3 4 5 →