Flow Characteristics in a Turbine Nozzle of Turbocharger

被引：0
|
作者：
Lei X. [1 ]
Qi M. [1 ]
Wang Z. [1 ]
Ma C. [1 ]
机构：
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing
来源：
Qi, Mingxu (qimx@bit.edu.cn) | 1600年 / Chinese Society for Internal Combustion Engines卷 / 35期
关键词：
Clearance leakage flow; Interaction; Schlieren experiment; Shock wave; Variable nozzle turbine;
D O I：
10.16236/j.cnki.nrjxb.201704052
中图分类号：
学科分类号：
摘要：
The clearance leakage flow has significant influence on the performances of variable nozzle turbine. In the other hand, the shock wave near the nozzle vane trailing edge can cause a forced response on the impeller, which can frequently lead to the impeller high-cycle fatigue failure. The interaction of the shock wave and the clearance leakage flow not only causes the loss of the flow, but also has significant influences on the reliability and lifetime of the turbine. The schlieren experiment and numerical simulations were carried out to describe the formation and developing processes of the clearance leakage flow and the shock wave under different clearance and expansion ratios in a linear turbine nozzle. Results indicate that the expansion ratio and clearance configurations have significant influences on the shock wave and the leakage flow. And the influence range of the clearance flow on the shock wave is increased with the increase of the expansion ratio or the clearance ratio. Furthermore, the shock wave is squeezed and bent in the opposite direction of the main flow in the interaction region. Results also show that with the increase of clearance ratio, the influence range of the clearance leakage flow is extended while the shock wave intensity near mid-span is increased. © 2017, Editorial Office of the Transaction of CSICE. All right reserved.
引用
收藏
页码：369 / 375
页数：6
相关论文
共 9 条
  • [1] Spence S.W.T., O'Neill J.W., Cunningham G., An investtigation of the flow field through a variable geometry turbine stator with vane endwall clearance, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220, 8, pp. 899-910, (2006)
  • [2] Tamaki H., Goto S., Unno M., Et al., The effect of clearance flow of variable area nozzles on radial turbine performance, ASME Turbo Expo 2008: Power for Land, Sea, and Air, 6, pp. 1519-1529, (2008)
  • [3] Tamaki H., Unno M., Iwakami A., Et al., Study on flow fields in variable area nozzles for radial turbines, IHI Engineering Review, 40, 2, pp. 89-97, (2007)
  • [4] Hu L.J., Sun H., Yi J.W., Et al., Investigation of nozzle clearance effects on a radial turbine: Aerodynamic performance and forced response, (2013)
  • [5] Heyes F.J.G., Hodson H.P., Dailey G.M., The effect of blade tip geometry on the tip leakage flow in axial turbine cascades, ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition, (1991)
  • [6] Bindon J.P., Morphis G., The development of axial turbine leakage loss for two profiled tip geometries using linear cascade data, ASME 1990 International Gas Turbine and Aeroengine Congress and Exposition, (1990)
  • [7] Bindon J.P., The Measurement and formation of tip clearance loss, Journal of Turbomachinery, 111, 3, pp. 257-263, (1989)
  • [8] Kawakubo T., Unsteady rotor-stator interaction of a radial-inflow turbine with variable nozzle vanes, ASME Turbo Expo 2010: Power for Land, Sea, and Air, (2010)
  • [9] Liu Y.Y., Lao D.Z., Liu Y.Y., Et al., Investigation on the effects of nozzle openings for a radial turbine with variable nozzle, (2014)
1