Global Dimensional Optimization for the Design of Adjusting Mechanism of Variable Stator Vanes

被引：0
|
作者：
Tang Y. [1 ]
Guo W. [1 ]
机构：
[1] State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai
来源：
Guo, Weizhong (wzguo@sjtu.edu.cn) | 2020年 / Chinese Mechanical Engineering Society卷 / 56期
关键词：
Adjusting mechanism of variable stator vanes; Combined forward and inverse kinematics; Dimensional optimization; Global optimization; High pressure compressor;
D O I：
10.3901/JME.2020.11.026
中图分类号：
学科分类号：
摘要：
In order to avoid the problem of compressor surge, the variable stator vane (VSV) needs to follow the rules established by hydromechanics. The VSV is normally composed of several connected stages and actuated by one adjusting mechanism that contains several coupled spatial linkage mechanism units. It is difficult to perform the dimensional synthesis of the VSV adjusting mechanism since this mechanism is a coupled system of the several spatial linkage units and the rules established by hydromechanics are also complicated. Currently, a divide and conquer method is applied to synthesize the dimensions of the VSV adjusting mechanism by synthesizing the spatial linkage mechanism units one by one, hereafter the global optimization is unable to be achieved. In order to improve the VSV's adjustment accuracy, a novel global dimensional synthesis method is proposed by combining the forward kinematics (FK) and inverse kinematics (IK) considering the analytical solvability of the FK and IK models. An efficiently global optimization is achieved firstly to provide the initial solution by using the analytical IK model and then a global optimization of high accuracy is achieved by searching from the initial solution based on the numerical FK model. A case study is given to demonstrate the proposed method. © 2020 Journal of Mechanical Engineering.
引用
收藏
页码：26 / 36
页数：10
相关论文
共 14 条
  • [1] LIU Daxiang, JIN Jie, The development trends and prospect of world aeropropulsion technology in the 21st century, Engineering Science, 9, pp. 1-8, (2004)
  • [2] GUO Ling, On the mechanism design method for variable geometry component in variable cycle engine, (2014)
  • [3] MILLS J P, RUDDY J M., Independently-controlled gas turbine inlet guide vanes and variable stator vanes
  • [4] SUN Kai, LIN Qingsong, ZHANG Yishang, Kinematic optimization of compressor VSV system base on ADAMS and ISIGHT, The Seventh China Aviation Society Youth Science and Technology Forum, pp. 364-368, (2016)
  • [5] LIANG Shuang, YIN Xuemei, WANG Hua, Parametric design of stator blade jointly adjusting mechanism based on ADAMS, Aeroengine, 42, 1, pp. 65-69, (2016)
  • [6] YANG Wei, XU Wei, Preliminary application of parame- terized analysis based on ADAMS in VSV's adjusting mechanism design of high pressure compressor, Gas Turbine Experiment and Research, 25, 4, pp. 20-24, (2012)
  • [7] HE Fei, CHEN Guozhi, WEN Quan, Et al., Design of the control mechanism for the multistage axial compressor variable vane, Journal of Aerospace Power, 2, pp. 332-336, (2007)
  • [8] WIRKOWSKI P., Influence of the incorrect settings of axial compressor inlet variable stator vanes on gas turbine engine work parameters[J], Journal of KONES, 19, pp. 483-489, (2012)
  • [9] CHEN Maozhang, Some issues in the research and development of aeroengine HP compressor in China, Aeroengine, 2, pp. 5-11, (2006)
  • [10] CHENG Ronghui, Development of design technology for axial compressor, Gas Turbine Experiment and Research, 2, pp. 1-8, (2004)
12