Experimental study of the induced residual stresses during the manufacturing process of an aeronautic composite material

被引：0
|
作者：
Abou-Msallem, Y. [1 ,3 ]
Kassem, H. [2 ]
Jacquemin, F. [3 ]
Poitou, A. [3 ]
机构：
[1] Lebanese International University, Faculty of Engineering, Lebanon
[2] Lebanese University, Faculty of Science, Lebanon
[3] Ecole Centrale de Nantes, France
来源：
Research Journal of Applied Sciences, Engineering and Technology | 2010年 / 2卷 / 06期
关键词：
Composite materials - Manufacture - Yield stress - Shrinkage - Epoxy resins;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A methodology is proposed for predicting the formation and the development of the manufacturing residual stresses, this approach is based on the study of the evolution of the resin yield stress. In order to evaluate our method, a comparison has been made between the yield time (corresponding to the formation of a yield stress) and the gel time. A self-consistent model is used to determine the cure-dependent chemical shrinkage coefficient of the composite material. This model allows considering for the composite material behavior an anisotropic chemical shrinkage, which is not represented by a classical linear model. An experimental approach based on the peel-ply method is used to determine the distribution of the residual stresses through the thickness. © Maxwell Scientific Organization, 2010.
引用
收藏
页码：596 / 602
相关论文
共 50 条
  • [1] Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites
    Abou Msallem, Y.
    Jacquemin, F.
    Boyard, N.
    Poitou, A.
    Delaunay, D.
    Chatel, S.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (01) : 108 - 115
  • [2] A multi-scale study of residual stresses created during the cure process of a composite tooling material
    Lacoste, E.
    Freour, S.
    Jacquemin, F.
    RESIDUAL STRESSES VIII, 2011, 681 : 309 - 314
  • [3] Experimental and numerical analysis of residual stresses induced by the manufacturing process of longitudinal welded tubes
    Egger, Christian
    Simon, Nicola
    Luechinger, Marco
    Kern, Kerstin
    Schreiner, Michael
    Tillmann, Wolfgang
    Gibmeier, Jens
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2024, 59 (05): : 351 - 365
  • [4] Experimental Investigation on the Residual Stresses Induced by a Plastic Forming Process
    Lamanna, G.
    Grassia, L.
    Ascione, V.
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, 2011, 452-453 : 821 - +
  • [5] Residual stresses in paperboard through the manufacturing process
    Östlund, M
    Östlund, S
    Carlsson, LA
    Fellers, C
    JOURNAL OF PULP AND PAPER SCIENCE, 2005, 31 (04): : 197 - 201
  • [6] The residual stresses and strains in the composite material barrel
    Wang, JH
    Qian, LF
    Yuan, RS
    Proceedings of the International Conference on Mechanical Engineering and Mechanics 2005, Vols 1 and 2, 2005, : 1154 - 1159
  • [7] Thermal residual stresses in composite material barrel
    College of Mechanical Engineering, NUST, Nanjing 210094, China
    Dandao Xuebao, 2007, 1 (82-85):
  • [8] Optimization of process-induced residual stresses in automated manufacturing of thermoset composites
    Ammar, Mohammed M. A.
    Shirinzadeh, Bijan
    Zhao, Pan
    Shi, Yaoyao
    AEROSPACE SCIENCE AND TECHNOLOGY, 2022, 123
  • [9] EXPERIMENTAL DETERMINATION OF RESIDUAL STRESSES IN AN ORTHOTROPIC MATERIAL
    FRICK, RP
    GURTMAN, GA
    MERIWETH.HD
    JOURNAL OF MATERIALS, 1967, 2 (04): : 719 - &
  • [10] An Experimental Study on Residual Stresses and the Evaluation of Performance of Polymer Composite Materials
    Bochkarev, S. V.
    Salnikov, A. F.
    Galinovsky, A. L.
    MECHANICS OF COMPOSITE MATERIALS, 2023, 59 (05) : 977 - 988
12345