Contact Bounce Suppression Based on Flux Linkage of Wide Voltage Range Intelligent AC Contactor

被引：0
|
作者：
Zhang C. [1 ]
Xu Z. [1 ]
机构：
[1] College of Electrical Engineering and Automation, Fuzhou University, Fuzhou
来源：
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2018年 / 33卷 / 21期
关键词：
Capacitor-free; Contact bounce; Flux linkage; Intelligent AC contactor; Wide voltage range;
D O I：
10.19595/j.cnki.1000-6753.tces.171374
中图分类号：
学科分类号：
摘要：
In order promote the miniaturization process of intelligent AC contactor, this paper established a capacitor-free coil drive topology. And a strategy for eliminating the contact bounce of intelligent AC contactor in wide voltage range was proposed, which combined flux linkage variable with current closed-loop control technology during the closure. The feasibility of determining wheatear the contact is about to close though the flux linkage was verified by two kinds of double E-type direct-acting contactors. And took one kind for representative to analyze the effect of excitation voltage and phase on flux linkage, and then programed the process of wide range voltage contact bounce suppression strategy and experimented. The experimental results show that the strategy can effectively reduce the contact bouncing time of intelligent AC contactor in wide voltage range. © 2018, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码：4998 / 5006
页数：8
相关论文
共 20 条
  • [1] Xu Y., Lan Q., Hong W., Experimental research on AC contactor sensitivity during voltage sags, Transactions of China Electrotechnical Society, 30, 21, pp. 136-146, (2015)
  • [2] He X., Xu Z., Virtual prototyping technology of AC contactor, Transactions of China Electrotechnical Society, 31, 14, pp. 148-155, (2016)
  • [3] Yang Y., Su X., Yue D., Et al., Research on dynamic response uncertainty evaluation of AC contactors, Proceedings of the CSEE, 33, 33, pp. 130-138, (2013)
  • [4] Li J., Su X., Zheng X., Et al., Analysis of the contact bounce based on dynamic contact pressure, Transactions of China Electrotechnical Society, 30, 9, pp. 138-144, (2015)
  • [5] Ramirez-Laboreo E., Sagues C., Llorente S., A new model of electromechanical relays for predicting the motion and electromagnetic dynamics, IEEE Transactions on Industry Applications, 52, 3, pp. 2545-2553, (2016)
  • [6] Lin S., Xu Z., Simulations and numerical analysis on 3D dynamic process of alternating current contactors, Proceedings of the CSEE, 34, 18, pp. 2967-2975, (2014)
  • [7] Zhuang J., Xu Z., Integrated control and simulation of AC contactor, Low Voltage Apparatus, 19, pp. 1-6, (2014)
  • [8] LS Metalsol series 2100AF products, Electrical & Energy Management Technology, 5, (2014)
  • [9] Yoshida K., Sawa K., Suzuki K., Et al., Influence of source voltage on various characteristics of a contactor comparing make only, break only and make and break arcs, 2012 IEEE 58th Holm Conference on Electrical Contacts, pp. 1-7, (2012)
  • [10] Guo K., Wang L., Zhang C., Et al., Research on suppressing bounce of synchronization contactor based on model predictive control, Proceedings of the CSEE, 37, 9, pp. 2717-2725, (2017)
12