Ultra-narrow gap high power fiber laser beam welding of stainless steel heavy section with filler wire

被引:0
|
作者
机构
[1] Zhang, Guowei
[2] Xiao, Rongshi
来源
Xiao, Rongshi (rsxiao@bjut.edu.cn) | 1600年 / Science Press卷 / 41期
关键词
Defects - Heat conduction - Laser beams - Wire - Fillers - Steel fibers - Fiber lasers - Stainless steel - Welds;
D O I
10.3788/CJL201441.s103003
中图分类号
学科分类号
摘要
The effects of welding parameters such as spot diameter, gap width, laser power and welding speed on the joint formation of ultra-narrow gap laser beam welding with filler wire are studied by using IPG YLS-6000 fiber laser and defocused beam. Results show that when the spot diameter is wider than gap width and leading filler wire and filler wire melting in molten pool are used, the joint formation in heat conduction welding model is the best; smaller spot diameter leads to and larger spot diameter leads to pores, excessive fusion of sidewalls. Under the same welding conditions, the greater the gap width, the narrower range of welding process windows for welded joints without defects will be. As the gap width increases, the suitable laser power is increased, and the welding speed is reduced. Small heat input can produce lack of fusion on sidewall, and larger heat input can cause keyhole induced pores. Under the optimized parameters, 60 mm thick stainless steel plates are welded by less than 5 mm ultra-narrow-gap laser welding with filler wire, and a complete defects free butt joint which consists of 20 layers is obtained. The width of weld is uniform and only about 3.8 mm, and the angular distortion of the joint is about 0.6°.
引用
收藏
相关论文
共 50 条
  • [1] Ultra-narrow gap welding of thick section of austenitic stainless steel to HSLA steel
    Anant, Ramkishor
    Ghosh, P. K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 239 : 210 - 221
  • [2] Fatigue properties of B950CF steel ultra-narrow gap laser wire filler welding joint
    Zhang, Chengzhu
    Wang, Dongye
    Hua, Cheng
    Liu, Yue
    Zhang, Qian
    Zhu, Zhenxin
    Hanjie Xuebao/Transactions of the China Welding Institution, 2024, 45 (09): : 94 - 102
  • [3] Ultra-Narrow Gap Fiber Laser Conduction Welding Technology for 304 Stainless Steel Thick Plates and the Mechanical Properties of Welding Joints
    Zhang, Guowei
    Yu, Feihu
    COATINGS, 2022, 12 (01)
  • [4] The multi-objective optimization modelling for properties of 301 stainless steel welding joints in ultra-narrow gap laser welding
    Chen, Long
    Yang, Tao
    Zhuang, Yuan
    Chen, WeiLin
    WELDING IN THE WORLD, 2021, 65 (07) : 1333 - 1345
  • [5] The multi-objective optimization modelling for properties of 301 stainless steel welding joints in ultra-narrow gap laser welding
    Long Chen
    Tao Yang
    Yuan Zhuang
    WeiLin Chen
    Welding in the World, 2021, 65 : 1333 - 1345
  • [6] Narrow-gap laser welding using filler wire of thick steel plates
    Yong Zhao
    Shengchong Ma
    Jian Huang
    Yixiong Wu
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 2955 - 2962
  • [7] Narrow-gap laser welding using filler wire of thick steel plates
    Zhao, Yong
    Ma, Shengchong
    Huang, Jian
    Wu, Yixiong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (5-8): : 2955 - 2962
  • [8] Microstructures and Mechanical Properties of Hundred-Millimeter-Grade 304 Stainless Steel Joints by Ultra-Narrow Gap Laser Welding
    Yang Wuxiong
    Xin Jijun
    Fang Chao
    Dai Wenhua
    Wei Jing
    Wu Jiefeng
    Song Yuntao
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2018, 45 (07):
  • [9] Studies on the formation mechanism of incomplete fusion defects in ultra-narrow gap laser wire filling welding
    Yang, Tao
    Liu, Junfeng
    Zhuang, Yuan
    Sun, Kai
    Chen, Weilin
    OPTICS AND LASER TECHNOLOGY, 2020, 129
  • [10] Effect of welding heat input on microstructure and properties of TC4 titanium alloy ultra-narrow gap welded joint by laser welding with filler wire
    Fang, Naiwen
    Guo, Erjun
    Huang, Ruisheng
    Yin, Limeng
    Chen, Yongsheng
    Zeng, Caiyou
    Cao, Hao
    Zou, Jipeng
    Xu, Kaixin
    MATERIALS RESEARCH EXPRESS, 2021, 8 (01)