Mechanism of roof presplitting in a nonpillar mining method with entry automatically retained and its influence on the strata behaviors

被引：0

作者：

Gao Y. ^{[1
,2
]}

Yang J. ^{[1
,2
]}

Wang Q. ^{[1
,3
]}

Wang Y. ^{[4
]}

He M. ^{[1
]}

机构：

[1] State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology (Beijing), Beijing

[2] School of Mechanics and Civil Engineering, China University of Mining & Technology (Beijing), Beijing

[3] Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan

[4] College of Civil Engineering, Tongji University, Shanghai

来源：

Meitan Xuebao/Journal of the China Coal Society | 2019年 / 44卷 / 11期

关键词：

Directional roof splitting; Gob-side entry formation; Mine strata behaviors; Nonpillar mining; Roof cutting and pressure release;

D O I：

10.13225/j.cnki.jccs.2019.0652

中图分类号：

学科分类号：

摘要：

The directional roof presplitting technology is the core of the nonpillar mining method with entry automatically retained. The effects of roof presplitting directly influence the stability of the retained entry. Based on the engineering practice in Ningtiaota coal mine, China, the theoretical analysis method was used to investigate the mechanism of directional roof presplitting, and the influence of roof presplitting on the sur-rounding rock behaviors was studied by discrete element numerical simulation and field experiment. The results show that the cracks propagated in random directions in the entry roof under the conventional blasting condition, and the integrity of the entry roof was easily destroyed. However, under the energy-accumulated tensile blasting condition, the directional crack could be generated under the guidance of original penetrated crack. To achieve ideal roof cutting effects, the charging amounts and blast hole distance should be harmoni-ously designed. The roof cutting parameters had an important influence on the deformation and stress distri-bution in the entry surroundings. Within a certain range, the increase of roof cutting height could increase the bulking volume of the gob roof, reduce the deformation of the entry roof and reduce the stress concentration in the integrated coal rib. However, when the cutting height was too large, the construction difficulty increased, and it was not conducive to the stability of the retained entry. When the cutting direction was vertical to the roof, the deformation of the entry surroundings was the largest. When there was a rational angle (10°-20°) between the roof cutting and vertical direction, the deformation of the entry surroundings was significantly reduced. Field test shows that when the roof cutting height was 9.0 m, roof cutting angle was 10°, the distance between blast holes was 600 mm, the charging amount of a single hole was 3 200 g, the gob roof could fully collapse and the final entry retaining effects were satisfactory in the Ningtiaota coal mine. It is concluded that the roof cutting height affects the bulking gangues and its action on the short arm roof rock structure, whereas the roof cutting angle affects the dynamic dropping force and steady supporting force acting on the short arm roof structure during caving and stabilizing processes. The key of the roof splitting in the new nonpillar mining method is cutting off the connection of the gob and entry roof. The roof splitting effects and interactive relationship between the gangues and short arm roof rock structure should be comprehensively considered when the roof cutting parameters are designed. © 2019, Editorial Office of Journal of China Coal Society. All right reserved.

引用

页码：3349 / 3359

页数：10

共 27 条

[1] Song Z., Cui Z., Xia H., Et al., The fundamental theoretical and engineering research on the green safe no coal pillar mining model by mainly using coal gangue backfill, Journal of China Coal Society, 35, 5, pp. 705-710, (2010)
[2] Kang H., Niu D., Zhang Z., Et al., Deformation characteristics of surrounding rock and supporting technology of gob-side entry retaining in deep coal mine, Chinese Journal of Rock Mechanics and Engineering, 29, 10, pp. 1977-1987, (2010)
[3] Hua X., Zhao S., Zhu H., Et al., Research on combined support technique of gob-side entry retaining, Rock and Soil Mechanics, 27, 12, pp. 2225-2228, (2006)
[4] Wang Q., He M., Yang J., Et al., Study of a no-pillar mining technique with automatically formed gob-side entry retaining for longwall mining in coal mines, International Journal of Rock Mechanics and Mining Sciences, 110, pp. 1-8, (2018)
[5] Gao Y., Guo Z., Yang J., Et al., Steady analysis of gob-side entry retaining formed by roof fracturing and control techniques by op-timizing mine pressure, Journal of China Coal Society, 42, 7, pp. 1672-1681, (2017)
[6] Sun X., Liu X., Liang G., Et al., Key parameters of gob-side entry retaining formed by roof cut and pressure releasing in thin coal seams, Chinese Journal of Rock Mechanics and Engineering, 33, 7, pp. 1449-1456, (2014)
[7] Guo Z., Wang J., Cao T., Et al., Research on key parameters of gob-side entry retaining automatically formed by roof cutting and pressure release in thin coal seam mining, Journal of China University of Mining and Technology, 45, 5, pp. 879-885, (2016)
[8] He M., Ma X., Niu F., Et al., Adaptability research and application of rapid gob-side entry retaining formed by roof cutting and pressure releasing with composite roof and medium thick coal seam, Chinese Journal of Rock Mechanics and Engineering, 37, 12, pp. 2641-2654, (2018)
[9] Gao Y., Yang J., He M., Et al., Mechanism and control techniques for gangue rib deformations in gob-side entry retaining formed by roof fracturing in thick coal seams, Chinese Journal of Rock Mechanics and Engineering, 36, 10, pp. 2492-2502, (2017)
[10] He M., Gao Y., Yang J., Et al., Engineering experimentation of gob-side entry retaining formed by roof cutting and pressure release in a thick-seam fast-extracted mining face, Rock and Soil Mechanics, 39, 1, pp. 254-264, (2018)

← 1 2 3 →