Review on on⁃line monitoring of chatter in cutting process

被引：0
|
作者：
Li Y. [1 ,3 ]
Dend Z. [2 ,3 ]
Liu T. [1 ,3 ]
Zhuo R. [1 ,3 ]
Li Z. [1 ,3 ]
Lv L. [1 ,3 ]
机构：
[1] School of Mechanical Engineering, Hunan University of Science and Technology, Xiangtan
[2] Institute of Manufacturing Engineering, Huaqiao University, Xiamen
[3] Hunan Provincial Key Laboratory of High Efficiency and Precision Machining of Difficult-to-Cut Materials, Hunan University of Science and Technology, Xiangtan
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2023年 / 44卷 / 11期
基金：
中国国家自然科学基金;
关键词：
chatter recognition; cutting chatter; data acquisition; on-line monitoring; signal processing; supervised learning; unsuper⁃ vised learning;
D O I：
10.7527/S1000-6893.2022.27562
中图分类号：
学科分类号：
摘要：
Chatter is a widespread problem in aerospace manufacturing and other fields. In-depth research on on-line monitoring of chatter in cutting process is of great significance to further improve the suppression effect of chatter and ensure the stable operation of machining system. According to the real-time and accuracy requirements of the chatter online monitoring，this paper focuses on data acquisition，online feature extraction，and chatter recognition. Firstly，the characteristics of three kinds of chatter data acquisition methods are summarized，and then the application of chat⁃ ter features and the key factors affecting chatter feature extraction are elaborated and analyzed. Later，the characteris⁃ tics of chatter recognition techniques based on the supervised and unsupervised learning are compared and summa⁃ rized. Finally，problems existed in the current on-line chatter monitoring and the development trend in the future are discussed，which can provide reference for the research of on-line chatter monitoring in the future. © 2023 AAAS Press of Chinese Society of Aeronautics and Astronautics. All rights reserved.
引用
收藏
相关论文
共 122 条
  • [1] DANG X B，, WAN M，, YANG Y., Prediction and sup⁃ pression of chatter in milling of structures with low rigid⁃ ity：A review［J］, Journal of Advanced Manufacturing Science and Technology, 1, 3, (2021)
  • [2] YUE C X, ZHANG J T，, LIU X L，, Et al., Research prog⁃ ress on machining deformation of thin-walled parts in milling process［J］, Acta Aeronautica et Astronautica Si⁃ nica, 43, 4, (2022)
  • [3] SUI H, ZHANG D Y，, CHEN H W，, Et al., Influence of ultrasonic vibration cutting on mode-coupling chatter［J］, Acta Aeronautica et Astronautica Sinica, 37, 5, pp. 1696-1704, (2016)
  • [4] LIAO W H, ZHENG K, SUN L J，, Et al., Review on chatter stability in robotic machining for large complex components［J］, Acta Aeronautica et Astronautica Si⁃ nica, 43, 1, (2022)
  • [5] A short review on mill⁃ ing dynamics in low-stiffness cutting conditions：Model⁃ ing and analysis［J］, Journal of Advanced Manufacturing Science and Technology, 1, 1, (2021)
  • [6] YUE C X，, GAO H N，, LIU X L，, Et al., A review of chat⁃ ter vibration research in milling［J］, Chinese Journal of Aeronautics, 32, 2, pp. 215-242, (2019)
  • [7] WANG Z X, LIU X L, LI M Y，, Et al., Intelligent moni⁃ toring and control technology of cutting chatter［J］, Jour⁃ nal of Mechanical Engineering, 56, 24, pp. 1-23, (2020)
  • [8] WANG Y S，, HU F, ZHANG M J，, Et al., Status online monitoring technology for intelligent manufacturing［J］, Measurement and Control Technology, 37, 5, pp. 3-8, (2018)
  • [9] YU J., Research on network monitoring and energy con⁃ sumption modeling of NC machine tool based on MTCon⁃ nect［D］, (2018)
  • [10] YAO Z H, MEI D Q，, CHEN Z C., On-line chatter detec⁃ tion and identification based on wavelet and support vec⁃ tor machine［J］, Journal of Materials Processing Technol⁃ ogy, 210, 5, pp. 713-719, (2010)
12345678910