Study on the movement and lubrication characteristics of floating piston pin for diesel engine

被引：0
|
作者：
Xiang J.-H. [1 ]
Tian D.-F. [1 ]
Chen H.-W. [1 ]
Liu K.-W. [1 ]
机构：
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing
来源：
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology | 2016年 / 36卷 / 09期
关键词：
Diesel engine; Floating piston pin; Lubrication characteristic; Movement characteristic;
D O I：
10.15918/j.tbit1001-0645.2016.09.001
中图分类号：
学科分类号：
摘要：
Based on the EHL theory, the average flow model and the asperity contact theory, both the finite difference method (FDM) and the multi-body dynamic (MBD) method were used synthetically with component mode to analyze the movement and lubrication characteristics of the floating piston pin for diesel engine. And the effect of the surface roughness on the friction power loss of piston pin bearing was also analyzed. The results show that, the angular velocity of piston pin is small, which is almost zero in the entire power stroke; the piston pin bearing works under mixed lubrication condition in most time, and works under fluid lubrication condition only when the connecting rod's revolving angle is in maximum at the intake stroke and exhaust stroke. Through appropriately decreasing the surface roughness of piston pin (hole), the angular velocity of piston pin can be increased in the power stroke, and the total friction of piston pin bearing can be reduced significantly, which will improve the lubrication condition of piston pin. © 2016, Editorial Department of Transaction of Beijing Institute of Technology. All right reserved.
引用
收藏
页码：881 / 886
页数：5
相关论文
共 7 条
  • [1] Fridman V., Piraner I., Clark K., Modeling of mixed lubrication conditions in a heavy duty piston pin joint, Proceedings of ASME 2006 Internal Combustion Engine Division Spring Technical Conference, pp. 741-748, (2006)
  • [2] Zhang J., Zuo Z., Wang X., Et al., Analysis of the performance of piston pin bearing in mixed lubrication, Transactions of CSICE, 28, 1, pp. 79-84, (2010)
  • [3] Abed G., Zou Q., Barber G., Et al., Study of the motion of floating piston pin against pin bore, SAE International Journal of Engines, 6, 2, pp. 990-998, (2013)
  • [4] Shi F., An analysis of floating piston pin, SAE International Journal of Engines, 4, 1, pp. 2100-2105, (2011)
  • [5] Clark K., Antonevich J., Kemppainen D., Et al., Piston pin dynamics and temperature in a CI engine, SAE International Journal of Engines, 2, 1, pp. 91-105, (2009)
  • [6] Liu K., Xie Y., A study of surface flow factors and mixed lubrication property of piston ring-cylinder of engine, Chinese Internal Combustion Engine Engineering, 16, 3, pp. 66-72, (1995)
  • [7] Zhang J., He Z., Zhang G., Et al., Crankshaft-bearing of diesel engine lubrication based on dynamics and tribology analysis, Journal of Tianjin University, 44, 9, pp. 791-797, (2011)
1