Mechanical properties of high-strength HTRB600 steel bars under high temperature

被引：0

作者：

Gong W. ^{[1
]}

Hu K.-X. ^{[1
]}

Wang Y.-D. ^{[1
]}

机构：

[1] Research Institute of Structural Engineering and Disaster Reduction, Tongji University, Shanghai

来源：

Gongcheng Kexue Xuebao/Chinese Journal of Engineering | 2017年 / 39卷 / 09期

关键词：

HTRB600 high-strength steel bar; Mechanical properties; Simplified calculation method; Under high temperature;

D O I：

10.13374/j.issn2095-9389.2017.09.017

中图分类号：

学科分类号：

摘要：

Tensile testing of HTRB600 steel bars under high temperature was conducted to determine the mechanical properties of the steel under high temperature. The elastic modulus, proportional limit, yield strength, ultimate strength, and stress-strain curves of steel bars at 20, 200, 300, 400, 500, 600, 700, and 800℃ were obtained. The experimental results show that the elastic modulus, proportional limit, yield strength, and ultimate strength of the bars obviously decrease with increasing temperature. The yield strength, ultimate strength, proportional limit, and elastic modulus of the steel bars at 500 and 800℃ decrease to less than 50% and 10%, respectively, of those of the sample at room temperature. The stress-strain curve of the steel bars smoothens as the temperature increases, and the yield terrace disappears at 200℃. The degree of decrease in yield strength and ultimate strength of the 600 MPa steel bar is obviously larger than that of the <500 MPa steel bar. Finally, a simplified calculation method to determine the stress-strain curve of HTRB600 steel bars under high temperature was proposed. © All right reserved.

引用

页码：1428 / 1435

页数：7

共 18 条

[1] Wu H., Chen L.G., Experimental investigation on bond performance between reinforcement and concrete after fire, Ind Construct, 40, 2, (2010)
[2] Zhang Z.M., Ye Z.M., Liu T., Research progress in fire resistance of reinforced concrete structures, J Nat Disa, 16, 1, (2007)
[3] CECS 200: 2006 Technical Code for Fire Safety of Steel Structure in Buildings, (2006)
[4] GB 50016-2006 Code of Design on Building Fire Protection and Preventions, (2006)
[5] GB 50045-1995 Code for Fire Protection Design of Tall Buildings, (1995)
[6] Xiao J.Z., Dai Y.Y., Zhao Y., Et al., Stress-strain relationship of HRBF500 at high temperatures, J Build Mater, 11, 3, (2008)
[7] Wang Q.F., Wu H.C., Xu Y.Y., Et al., Experimental research on material properties of HRBF500 after high temperature, J Build Struc, 32, 2, (2011)
[8] Kumar V., Sharma U.K., Singh B., Et al., Effect of temperature on mechanical properties of pre-damages steel reinforcing bars, Construct Build Mater, 46, (2013)
[9] Felicentti R., Gambarova P.G., Meda A., Residual behavior of steel rebars and R/C sections after a fire, Construct Build Mater, 23, 12, (2009)
[10] Elghazouli A.Y., Cashell K.A., Izzuddin B.A., Experimental evaluation of mechanical properties of steel reinforcement at elevated temperature, Fire Safety J, 44, 6, (2009)

← 1 2 →