The design, calibration and adaption of a dynamometer for fine turning

被引：1
|
作者：
Horváth R. [1 ]
Pálinkás T. [1 ]
Mátyási G. [2 ]
Drégelyi-Kiss Á. [1 ]
机构：
[1] Donát Bánki Faculty of Mechanical and Safety Engineering, Óbuda University, Népszínház Street 8, Budapest
[2] Budapest University of Technology and Economics, Egry József Street 1, Budapest
来源：
International Journal of Machining and Machinability of Materials | 2017年 / 19卷 / 01期
关键词：
Cutting force measurement; Dynamometer design; Fine turning; Precision and metrology; Three-component piezo-electric dynamometer;
D O I：
10.1504/IJMMM.2017.081183
中图分类号：
学科分类号：
摘要：
In cutting research, the determination of the spatial force system of cutting processes is extremely important. Therefore, the forces generated need to be measured with high precision. In this paper, the development of a special three-component dynamometer system is presented for the measurement of small forces (0...100 N) in three directions during fine cutting, with a precision of 0.1 N. The designed dynamometer employs a piezo-electric cell and can easily be mounted on the tool post with only small modifications to the tool holder. The setup was calibrated for sensitivity, static load and range. By using error functions, the relative error in the measurement of force is kept below 1.5%. Copyright © 2017 Inderscience Enterprises Ltd.
引用
收藏
页码：1 / 16
页数：15
相关论文
共 50 条
  • [1] DESIGN, CONSTRUCTION AND CALIBRATION OF AN IMPULSE DYNAMOMETER
    BREDELL, LJ
    MEASUREMENT SCIENCE AND TECHNOLOGY, 1990, 1 (09) : 977 - 979
  • [2] A dynamometer design for measurement the cutting forces on turning
    Yaldiz, S
    Ünsaçar, F
    MEASUREMENT, 2006, 39 (01) : 80 - 89
  • [3] Design, development and testing of a turning dynamometer for cutting force measurement
    Yaldiz, Sueleyman
    Uensacar, Faruk
    MATERIALS & DESIGN, 2006, 27 (10): : 839 - 846
  • [4] Design and Development of a Tri-Axial Turning Dynamometer Utilizing Cross-Beam Type Force Transducer for Fine-Turning Cutting Force Measurement
    Rizal, Muhammad
    Ghani, Jaharah A.
    Mubarak, Amir Zaki
    SENSORS, 2022, 22 (22)
  • [5] Dynamic calibration of a dynamometer
    Haugse, ED
    Foss, GC
    Princehouse, DW
    PROCEEDINGS OF THE 14TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS I & II, 1996, 2768 : 1306 - 1312
  • [6] Design and Analysis of a Turning Dynamometer Embedded in Thin-Film Sensor
    Zhang, Yuntao
    Wu, Wenge
    Han, Yanwen
    Wen, Haijun
    Cheng, Yunping
    Liu, Lijuan
    MICROMACHINES, 2019, 10 (03)
  • [7] Dynamic calibration of a wheelchair dynamometer
    DiGiovine, CP
    Cooper, RA
    Boninger, ML
    JOURNAL OF REHABILITATION RESEARCH AND DEVELOPMENT, 2001, 38 (01): : 41 - 55
  • [8] Wireless walker dynamometer design and static calibration based on ant colony system
    Xu, Rui
    Ming, Dong
    Qiu, Shuang
    Wang, Xin
    Qi, Hongzhi
    Zhang, Lixin
    Wan, Baikun
    IET WIRELESS SENSOR SYSTEMS, 2013, 3 (03) : 233 - 238
  • [9] Dynamic calibration of metal cutting dynamometer
    Huang, Y. Q.
    Xu, Y. S.
    ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 76 - 80
  • [10] Design, Manufacturing, and Calibration Process of One Piece Lathe Dynamometer for Measurement in Two Axes
    Ates, Ergun
    Aztekin, Kadir
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2013, 135 (04):
12345