Manufacture and testing of composite T-joint fabricated via RTM process based on NCF technology

被引：0
|
作者：
Liu, Gang [1 ]
Luo, Chuyang [1 ,2 ]
Zhang, Daijun [1 ]
Zhang, Peng [1 ]
Zhang, Lianwang [1 ]
Yi, Xiaosu [1 ]
机构：
[1] Science and Technology on Advanced Composites Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095, China
[2] School of Transportation Science and Engineering, Beihang University, Beijing 100191, China
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2012年 / 29卷 / 04期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
15
引用
收藏
页码：99 / 104
相关论文
共 16 条
  • [1] Progressive damage behaviour of RTM-made composite T-joint under tensile loading
    Bai, Jiang-Bo
    Dong, Chen-Hao
    Xiong, Jun-Jiang
    Luo, Chu-Yang
    Chen, Di
    COMPOSITES PART B-ENGINEERING, 2019, 160 : 488 - 497
  • [2] A Novel Preparation Method of Composite Bolted T-Joint with High Bending Performance Based on the Prepreg-RTM Co-Curing Process
    Zhang, Tao
    Luo, Zhitao
    Deng, Jinxin
    Pei, Yuchen
    Cheng, Xiaoquan
    POLYMERS, 2024, 16 (09)
  • [3] Additively manufactured resin transfer molding (RTM) plastic tooling for producing composite T-joint structures
    Aldhahri, Khalid S.
    Klosterman, Donald A.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (04) : 2283 - 2301
  • [4] Influence of process induced defects on the failure of composite T-joint specimens
    Trask, R. S.
    Hallett, S. R.
    Helenon, F. M. M.
    Wisnom, M. R.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (04) : 748 - 757
  • [5] Tensile properties and damage behaviors of the prepreg-RTM co-cured composite bolted T-joint with a novel configuration
    Luo, Zhitao
    Zhang, Tao
    Jing, Wenqi
    Cheng, Yujia
    Guo, Xin
    Cheng, Xiaoquan
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024,
  • [6] Lamb wave based ultrasonic imaging of interface delamination in a composite T-joint
    Ramadas, C.
    Padiyar, Janardhan
    Balasubramaniam, Krishnan
    Joshi, Makarand
    Krishnamurthy, C. V.
    NDT & E INTERNATIONAL, 2011, 44 (06) : 523 - 530
  • [7] Experimental and Numerical Investigation of Prepreg-RTM Co-Curing Molding Composite Bolted T-Joint under Bending Load
    Zhang, Tao
    Luo, Zhitao
    Li, Kenan
    Cheng, Xiaoquan
    POLYMERS, 2024, 16 (07)
  • [8] Damage evolution of z-pin reinforced composite T-joint based on simplified bridging traction model
    College of Aeronautics, Northwestern Polytechnical University, Xi'an
    710072, China
    不详
    710049, China
    Xibei Gongye Daxue Xuebao, 3 (375-381):
  • [9] Guided Wave based Damage Detection in a Composite T-joint using 3D Scanning Laser Doppler Vibrometer
    Geetha, G. Kolappan
    Mahapatra, D. Roy
    Gopalakrishnan, S.
    HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2012, 2012, 8348
  • [10] Investigation of process parameters for T-joint aluminum alloy 6061-T6 with nanocomposites material friction stir welding based on the Taguchi method
    Mustafa F.F.
    Daham S.R.
    Journal of Computational and Applied Research in Mechanical Engineering, 2021, 11 (01): : 101 - 111
12