Research on Critical Open and Close Pressures of an Oil Discharge Valve for High Speed Wet Shifting Clutch

被引：0
|
作者：
Lou W.-P. [1 ]
Zheng C.-S. [1 ,2 ]
Li H.-Y. [1 ,2 ]
Chen J.-W. [3 ]
Zhang Z.-L. [1 ]
Ma Y. [4 ]
机构：
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing
[2] Collaborative Innovation Center of Electric Vehicle in Beijing, Beijing
[3] Jianglu Electromechanical Co., Ltd., Xiangtan, 411100, Hunan
[4] Beijing Institute of Special Vehicle, Beijing
来源：
Zheng, Chang-Song (zhengchangsong@bit.edu.cn) | 1665年 / China Ordnance Industry Corporation卷 / 38期
关键词：
Critical close pressure; Critical open pressure; High speed wet clutch; Integrated transmission; Motion law; Oil discharge valve; Ordnance science and technology;
D O I：
10.3969/j.issn.1000-1093.2017.09.001
中图分类号：
学科分类号：
摘要：
For the imperfect discharge of oil in the piston chamber during the rotation of wet clutch at a high speed, a centrifugal oil discharge valve structure is researched. A mathematical model of oil discharge valve is established based on the force analysis, and the movement process of steel ball in oil discharge valve is analyzed. A test system for wet clutch system with oil discharge valve is developed. The critical open and close pressures of the oil discharge valve are studied through experiment. The simulated and experimental results show that the oil discharge valve can effectively discharge the remaining oil in the piston chamber when the wet clutch separates at a high speed, and the critical open and close pressure features of the oil discharge valve are obtained. The critical open and close pressures increase with the increase in the tilting angle of valve body, α, and the radius of steel ball, rb. According to the changing feature, a computing method for calculating α and rb from the minimum value of critical open pressure and the maximum value of critical close pressure is proposed. © 2017, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码：1665 / 1672
页数：7
相关论文
共 13 条
  • [1] Yao X.-W., Ma B., Simulation and experiment research of dynamic performance in working process of depressurization holes in different position, Vehicle & Power Technology, 2, pp. 8-11, (2006)
  • [2] Meng F., Zhang H., Cao D.P., System modeling and pressure control of a clutch actuator for heavy-duty automatic transmission systems, Transactions on Vehicular Technology, 65, 7, pp. 4865-4874, (2016)
  • [3] Ompusunggu A.P., On the derivation of the pre-lockup feature based condition monitoring method for automatic transmission clutches, Mechanical Systems and Signal Processing, 46, 1, pp. 114-128, (2014)
  • [4] Meng F., Chen H., Zhang T., Et al., Clutch fill control of an automatic transmission for heavy-duty vehicle applications, Mechanical Systems and Signal Processing, 64, pp. 16-28, (2015)
  • [5] Zhao X.-X., Zhang W.-M., Feng Y.-L., Et al., Gear shift modeling and simulation for construction vehicle, Journal of Huazhong University of Science & Technology: Natural Science Edition, 42, 3, pp. 112-116, (2014)
  • [6] You S.-H., Yu N., Research of oil drainage performance for high speed wet shifting clutch, Construction Machinery and Equipment, 38, 3, pp. 30-34, (2007)
  • [7] Zhang J.-L., Study on the control technology of shift clutch for power-shift steering transmission, pp. 38-40, (2007)
  • [8] Shi Y.-H., Jiang H.-X., Feng G.-J., Et al., Study of the dynamic characteristic of centrifugal-type oil-discharge valve for automatic transmission, Manufacturing Automation, 37, 4, pp. 6-10, (2015)
  • [9] Liang L., Xu C.-X., The design calculation of the discharge oil valve for bulldozer shift clutch, Construction Machinery and Equipment, 4, pp. 24-27, (1989)
  • [10] Bian X.-L., The evaluation index of the oil discharge valve for shift clutch, Construction Machinery and Equipment, 3, pp. 6-8, (1998)
12