Study on source of inclusions in non-oriented silicon steel

被引：0
|
作者：
Wang A.-R. [1 ,2 ]
Yang S.-F. [1 ,2 ]
He B.-F. [1 ,2 ]
Li J.-M. [3 ]
Li S.-Q. [1 ,2 ]
机构：
[1] State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing
[2] School of Metallurgy and Ecological Engineering, University of Science and Technology Beijing, Beijing
[3] Taiyuan Iron and Steel (Group) Co. Ltd., Taiyuan
来源：
Gongcheng Kexue Xuebao/Chinese Journal of Engineering | 2016年 / 38卷
关键词：
Inclusion source; Non-oriented silicon steel; Tracer;
D O I：
10.13374/j.issn2095-9389.2016.s1.030
中图分类号：
学科分类号：
摘要：
To study the source of inclusions in casting billets, 10% BaCO3, 10% SrCO3, and 10% La2O3 were used as tracers into the steel ladle, tundish covering flux, and tundish-coating refractories, respectively, during the production of non-oriented silicon steel. The steel and slag samples were taken from the related working procedure, and scanning electron microscopy (SEM) and a microscope were used to analyze the morphology and composition of inclusions. Experimental results show that the large inclusions in non-oriented silicon steel are mainly SiO2, Al2O3, and aluminosilicate, resulting from the protecting slag and secondary oxidation. © All right reserved.
引用
收藏
页码：181 / 186
页数：5
相关论文
共 8 条
  • [1] Matsumura K., Fukuda B., Recent developments of non-oriented electrical steel sheets, IEEE Trans Magn, 20, 5, (1984)
  • [2] Guo Y.Y., Liu X.C., Cai K.K., Et al., Research on behavior of inclusions in non-oriented silicon steel in BOF-RH-CC route, Iron Steel, 40, 4, (2005)
  • [3] Hou C.K., Liao C.C., Effect of cerium content on the magnetic properties of non-oriented electrical steels, ISIJ Int, 48, 4, (2008)
  • [4] Lu X.J., Zhang F., Wang B., Et al., Effect of inclusions on magnetic properties of non-oriented silicon steel, Spec Steel, 33, 4, (2012)
  • [5] Zhang F., Ma C.S., Wang B., Et al., Control of non-metallic inclusions of non-oriented silicon steel sheets by the rare earth treatment, Baosteel Tech Res, 5, 2, (2011)
  • [6] Boc I., Cziraki A., Grof T., Et al., Analysis of inclusions in cold-rolled n.o. Si-Fe strips, J Magn Magn Mater, 83, 1-3, (1990)
  • [7] He A.R., Shao J., Sun W.Q., Et al., Transverse thickness deviation control of non-oriented silicon steel during cold rolling, J Mech Eng, 47, 10, (2011)
  • [8] Dong H., Zhao Y., Yu X.J., Et al., Effect of normalizing temperature on magnetic properties and texture of thin non-oriented electrical steel sheets, J Iron Steel Res, 20, 5, (2008)
1