Effect of intermediate annealing on microstructure and property of 5182 aluminum alloy sheet for automobile

被引：0
|
作者：
Wang Y. [1 ,2 ]
Cao L.-Y. [1 ,2 ,3 ]
Li J.-P. [1 ,2 ]
Zhang H. [1 ]
Guo F.-A. [1 ,2 ]
机构：
[1] National Engineering Research Center for Plastic Working of Aluminum Alloys, Shandong Nanshan Aluminum Co.,Ltd., Longkou, 265713, Shandong
[2] Beijing Nanshan Institute of Aeronautical Materials, Beijing
[3] School of Materials Science and Engineering, Central South University, Changsha
来源：
Cao, Ling-Yong (lingyongcao@163.com) | 1600年 / Beijing Institute of Aeronautical Materials (BIAM)卷 / 44期
关键词：
Aluminium alloy; Forming ability; Intermediate annealing; Mechanical property; Microstructure;
D O I：
10.11868/j.issn.1001-4381.2016.09.012
中图分类号：
学科分类号：
摘要：
Effect of intermediate annealing on the microstructure and properties of 5182 aluminum alloy sheet with full annealed state (5182-O) was investigated by means of optical microscope, scanning electron microscope and universal testing machine. The results indicate that compared with 5182-O sheet without intermediate annealing, 5182-O sheet with intermediate annealing possesses too fine grain size, intermetallic compounds not broken enough, larger size intermetallic particles, less dispersed phase. Yield strength and ultimate tensile strength, work hardening exponent and normal anisotropy of plastic strain ratio decrease but planner anisotropy of plastic strain ratio increases. The mechanical properties and forming ability of 5182-O aluminum alloy sheet and its microstructure are not improved significantly after intermediate annealing. © 2016, Journal of Materials Engineering. All right reserved.
引用
收藏
页码：76 / 81
页数：5
相关论文
共 18 条
  • [1] Millr W.S., Zhuang L., Bottema J., Et al., Recent development in aluminum alloys for the automotive industry, Materials Science and Engineering: A, 280, 1, pp. 37-49, (2000)
  • [2] Wang M.J., Huang D.Y., Jiang H.T., Research progress of aluminum alloys for the automotive industry, Heat Treatment of Metals, 31, 9, pp. 35-39, (2006)
  • [3] Ratchevay P., Verlinden B., Van Houttea P., Et al., Hot ductility of an Al-4wt.%Mg-0.5wt.%Cu alloy, Materials Science and Engineering: A, 222, 2, pp. 189-196, (1997)
  • [4] Li S.Y., Kang S.B., Ko H.S., Effect of intermediate annealing on texture evolution and plastic anisotropy in an Al-Mg auto-body alloy, Metallurgical and Materials Transactions A, 31, 1, pp. 99-107, (2000)
  • [5] Nurger G.B., Gupta A.K., Teffery P.W., Et al., Microstructural control of aluminum sheet used in automotive applications, Materials Characterization, 35, 1, pp. 23-39, (1995)
  • [6] Li S.Y., Kang S.B., Ko H.S., Texture and plastic anisotropy of Al-Mg-0.3Cu-1.0Zn alloys, Scripta Materialia, 37, 4, pp. 411-417, (1997)
  • [7] Li Y.J., Zhang W.Z., Marthinsen K., Precipitation crystallography of plate-shaped Al<sub>6</sub>(Mn, Fe) dispersoids in AA5182 alloy, Acta Materialia, 60, 17, pp. 5963-5974, (2012)
  • [8] Wen W., Morris J.G., The effect of cold rolling and annealing on the serrated yielding phenomenon of AA5182 aluminum alloy, Materials Science and Engineering: A, 373, 1-2, pp. 204-216, (2004)
  • [9] Wang M.J., Huang D.Y., Jiang H.T., Et al., Influence of annealing process on microstructure and properties of 5182 aluminum alloy sheet for automobile, Heat Treatment of Metals, 32, 9, pp. 18-20, (2007)
  • [10] Gao J.C., Chen Z.Q., Ming W.L., Effects of annealing process on properties of 5182 aluminum alloy strips, Transactions of Materials and Heat Treatment, 30, 3, pp. 146-149, (2009)
12