The role of microfractography in failure analysis of cold forging dies

被引：0
|
作者：
Ebara R. [1 ]
Takeda K. [1 ]
Iwamoto M. [1 ]
Fujimoto H. [1 ]
Ogura A. [2 ]
Hamaya S. [2 ]
机构：
[1] Dept. Mech. System Eng., Hiroshima Inst. Tech., Saeki-Ku, Hiroshima
[2] Nichidai Corporation, Shiotani, Tsuduki-Gun, Kyoto
来源：
Zairyo/Journal of the Society of Materials Science, Japan | 2011年 / 60卷 / 11期
关键词：
Cold forging die steels; Fatigue fracture surface; Fracture toughness; Stretched zone; Unstable fracture;
D O I：
10.2472/jsms.60.1009
中图分类号：
学科分类号：
摘要：
Microfractographic features in fracture surfaces for tensile, fatigue, impact, three point bending specimens of cold forging die steels with Rockwell C scale hardness number of 52 to 68 are presented. The emphasis is placed upon the stretched zone formation ahead of the fatigue crack and the relation between the stretched zone width and fracture toughness. Fatigue crack initiation behavior of plane and notched specimens are also characterized in low cycle up to giga-cycle ranges. A couple of microfractographic analyzed results for failed actual cold forging dies are exemplified. It can be concluded that qualitative and quantitative analysis by use of microfractograpy are possible for cold forging die failures. © 2011 The Society of Materials Science, Japan.
引用
收藏
页码：1009 / 1014
页数：5
相关论文
共 50 条
  • [1] Microfractography in failure analysis of cold forging dies
    Ebara, R.
    Takeda, K.
    Ishibashi, Y.
    Ogura, A.
    Kondo, Y.
    Hamaya, S.
    ENGINEERING FAILURE ANALYSIS, 2009, 16 (06) : 1968 - 1976
  • [2] Failure analysis of cold forging dies using FEA
    MacCormack, C
    Monaghan, J
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (1-2) : 209 - 215
  • [3] Failure analysis of hot forging dies for automotive components
    Ebara, Ryulchiro
    Kubota, Katsuaki
    ENGINEERING FAILURE ANALYSIS, 2008, 15 (07) : 881 - 893
  • [4] Fatigue in cold-forging dies:: tool life analysis
    Skov-Hansen, P
    Bay, N
    Gronbæk, J
    Brondsted, P
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 95 (1-3) : 40 - 48
  • [5] The failure mechanisms of hot forging dies
    Gronostajski, Zbigniew
    Kaszuba, Marcin
    Polak, Slawomir
    Zwierzchowski, Maciej
    Niechajowicz, Adam
    Hawryluk, Marek
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 657 : 147 - 160
  • [6] FILLET DESIGN IN COLD-FORGING DIES
    PETERSEN, T
    FREDERIKSEN, PS
    COMPUTERS & STRUCTURES, 1994, 50 (03) : 393 - 400
  • [7] TOOL STEEL DIES FOR COLD FORGING OF STEEL
    不详
    METAL FORMING, 1970, 37 (03): : 78 - &
  • [8] Analysis of wear of cold forging dies using the technique of focal differentiation microscopy
    Cwikla, Adam
    Tofil, Arkadiusz
    2019 IEEE 6TH INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE (METROAEROSPACE), 2019, : 629 - 632
  • [9] Analysis of the stress state in non-axially symmetrical cold forging dies
    Killmann, Martin
    Merklein, Marion
    18TH INTERNATIONAL CONFERENCE ON METAL FORMING 2020, 2020, 50 : 307 - 313
  • [10] Strain measurement in cold forging dies using PiezoBolts
    Grötzinger K.C.
    Deliktas T.
    Stahlmann J.
    Brenneis M.
    Felde A.
    Liewald M.
    WT Werkstattstechnik, 2022, 112 (10): : 683 - 688
12345